FS 1330-11 RS Industrial Air Spring Shocks Firestone W01-358-7197

FS 1330-11 RS Industrial Air Spring Shocks Firestone W01-358-7197 Phoenix Vibration Controls Pneumatic Technology

FS 1330-11 RS Cross OEM:

GUOMAT NO.:1F7197

ContiTECH FS 1330-11 RS

Continental FS 1330-11 RS

ContiTECH FS1330-11 RS

Continental FS1330-11 RS

Firestone W01-358-7197

Firestone W01 358 7197

Firestone W013587197

Firestone W01-358-5135

Firestone W01 358 5135

Firestone W013585135

FS 1330-11 RS Industrial Single Convoluted Air Spring Specifications

❶Nut / Blind Nut

The Long Of The Nut:38 mm

Top Cover Plate Screw number: 24 pcs

Bottom Cover Plate Screw number : 24 pcs

Top Cover Plate Screw (Nut) Tooth : M10

Screw Center Distance of Top Cover Plate : 419 mm

Bottom Cover Plate Screw (Nut) Tooth : M10

Screw Center Distance of Bottom Cover Plate : 419 mm

❷ Gas Hole / Air inlet / Air Fitting

Gas Hole / Air inlet : G1/2

❸ Cover Plate

Top Cover Plate Diameter: 451 mm

Bottom Cover Plate Diameter: 451 mm

❹Rubber Bellows

Rubber Bellows MAXl Diameter : 516mm

Rubber Bellows Natural Height :490 mm

❺ Bumper block / Buffer block

Without Bumper Block

❻ Girdle Hoop / Girdle Ring

Without Girdle Hoop

Stroke (MM) 99
Type series / MODELW01-M58-6966
Style 121
Number of bellows
Min Height (MM) 53 mm
Maximum height (MM) 152 mm
Maximum working height (MM) 145 mm
Maximum capacity (kN) 116 kN
Installation space (mm) 531 mm
Maximum diameter (mm) 516 mm
Weight (KG) 7.26 kg

FS 1330-11 RS UNF,

bellows type industrial air spring,

single-turn,

effective area 1330cm square,

maximum stroke 11cm,

stud bolt installation,

inch seal ring
Manufacturer: Mainland
Maximum inflation pressure
120 psi
series
RS
Bellows type
Single convolution
weight
16.1 lbs

Style 121 Two Ply Bellows  

Ribbed neck aluminum bead rings,17/8 bolts, nuts, washers
W01-358-7197
Rubber bellows only
W01-358-5135
Rolled Plate Assembly*, 1/2 blind nuts, 3/4 NPT
W01-358-7272

The Composition Of Industrial Convoluted Air Spring Element Has The Following Aspects

❶Nut / Blind Nut – As well a permanent part of the Cover Plate assembly. Provides an alternative to bolt installation system. It is inside defect within the iron plate

❷ Gas Hole / Air inlet / Air Fitting – Most usually 1/4 N.P.T. which provides the air entrance to the rubber bellows.

❸ Cover Plate - Curled up to more durable bellows design and the largest quality control in the factory. Allows 100% of the leak test before shipment.

❹Rubber Bellows - Air Bellows includes four layers of materials: an inner layer, two layer cord - reinforced fabrics, and a cover. Construction of a natural rubber provides – 65F functional properties.

❺ Bumper block / Buffer block - Solid rubber or engineering plastic device designed to prevent major damage to the vehicle or suspension in the event of a sudden loss of air pressure in the spring.

❻ Girdle Hoop / Girdle Ring - Molded wire-wound ring to provide lateral stability of the complex type spring bellows.

GUOMAT Air Springs can last at least twice lifetime, always as much as four times longer than steel springs!

• They almost do not need to maintain.
• Increase the service life of tires and brake pads.
• Let you pull anything; Eliminate expensive admission cost.
• Greatly reduce the breakage of the other vehicle components and maintenance.
• Back to you in the scrappage, truck and trailer with air suspension is more valuable.
• Allow the perfect load balancing between axles; Allow you to run in one of the largest legal restrictions.
• Reduce the discomfort and driver fatigue risk; Improve the efficiency of the driver's safety, and loyalty
• To provide smooth to load, reduce the cost of expensive insurance claims and packaging.