1756-PSCA2 Allen Bradley chassis adapter module
|
1756-PSCA2 Allen Bradley chassis adapter module The Allen-Bradley 1756-PSCA2 is a chassis adapter module used to funnel power from one or two redundant power supplies into the single power connector on the chassis backplane. It is an essential component in building ControlLogix Redundant Power Supply Systems. Only one of these is required to create a system, and it is compatible with Bulletin 1756-PA75R and 1756-PB75R power supplies.
The 1756-PSCA2 Redundant Power Supply Chassis Adapter is an open-type passive device. And it has a current capacity of 1.5 A at 1.2V DC, 4 A at 3.3V DC, 15 A at 5.1V DC, and 2.8 A at 24V DC. The 1756-PSCA2 Chassis is designed to be mounted horizontally. Connect it to the power supply using a 1756-CPR2 cable on the left side. This cable has a bend radius of 5 inches (12.7 cm) – which is also the minimum clearance to route and connect parts.
|
![]() |
2080-LC20-20QWB Allen Bradley Micro820 Programmable Controllers |
![]() |
1762-IR4 Allen Bradley MicroLogix 1200 RTD / Resistance Input Module |
![]() |
1762-L24BXBR Allen Bradley MicroLogix 1200 MPLC Unit |
![]() |
1734-4IOL Allen Bradley Combination Module |
![]() |
1734-OW4 Allen Bradley Point I/O 4DO Relay Module |
![]() |
1797-IE8H Allen Bradley FLEX Ex I/O 8 Input HART Analog Current Module |