NTMP01 ABB Termination Unit

NTMP01 ABB Termination Unit

⇒ Click here for good price NTMP01

Contact Us

Email: miya@mvme.cn (CLICK)

QQ: 2851195450

Tel: 86-18020776792(CLICK)

Skype:miyazheng520(CLICK)

Product details

1. Use Static Shielding Bag. Keep the modules in the static shielding bag until you are ready to install them in the system.Save the bag for future use.
2. Ground Bag Before Opening. Before opening a bag con-taining an assembly with semiconductors, touch it to the equipment housing or a ground to equalize charges.
3. Avoid Touching Circuitry. Handle assemblies by the edges; avoid touching the circuitry.
4. Avoid Partial Connection of Semiconductor. Verify that all devices connected to the modules are properly grounded before using them.
5. Ground Test Equipment.
6. Use an Antistatic Field Service Vacuum. Remove dust from the module if necessary.
7. Use a Grounded Wrist Strap. Connect the wrist strap to the appropriate grounding plug on the power entry panel. The grounding plug on the power entry panel is connected to the earth grounding electrode system through the AC safety ground.
8. Do Not Use Lead Pencils to Set Dipswitches. To avoid contamination of dipswitch contacts that can result in unnec-essary circuit board malfunction, do not use a lead pencil to set a dipswitch.

Our advantages

1.AB 1756/1769/1771/1785 Series
2.ABB 800xA/Bailey INFI90/DSQC/ Series
3.Bently Nevada 3500/3300 Monitoring System
4.Schneider Series Quantum 140 series
5.General electric IC693/IC697/IC698/IS200/DS200 Series
6.SIEMENS MOORE/S5 Series
7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts
8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.
9.Honeywell TDC2000/TDC3000/Experion HS Series
10.YOKOGAWA CS3000 System

More Products