480V 3Ph 30A 22C-D030N103 Allen Bradley Drives

22C-D030N103 AB AB Powerflex Drive 480V 3Ph 30A

⇒ Click here for good price 22C-D030N103

Product Details

Specification

Bus Overvoltage Trip: 200-240V AC Input: 405V DC bus voltage (equivalent to 290V AC

incoming line); 380-460V AC Input: 810V DC bus voltage (equivalent to 575V AC incoming line)

Bus Undervoltage Trip: 200-240V AC Input: 210V DC bus voltage (equivalent to 150V AC

incoming line); 380-480V AC Input: 390V DC bus voltage (equivalent to 275V AC incoming line)

Power Ride-Thru: 100 milliseconds

Logic Control Ride-Thru: 0.5 seconds minimum, 2 seconds typical

Electronic Motor Overload Protection: Provides class 10 motor overload protection according to NEC article 430 and motor over-temperature protection according to NEC article 430.126 (A) (2). UL 508C File 29572.

Overcurrent: 180% hardware limit, 220% instantaneous fault Ground Fault Trip: Phase-to-ground on drive output Short Circuit Trip: Phase-to-phase on drive output

Efficiency: 97.5% at rated amps, nominal line voltage

Output Frequency: 0-320 Hz (programmable)

Control Inputs

Digital:

Quantity: (3) Semi-programmable; (4) Programmable

Type

Source Mode (SRC): 18-24V = ON, 0-6V = OFF

Sink Mode (SNK): 0-6V = ON, 18-24V = OFF

Control Outputs

Relay: Quantity: (2) Programmable Form C

Resistive Rating: 3.0A at 30V DC, 3.0A at 125V, 3.0A at 240V AC

Inductive Rating: 0.5A at 30V DC, 0.5A at 125V, 0.5A at 240V AC

AB News

Pivot Production With Flexible Manufacturing

Crisis creates change – often permanent. Consumers behave differently. Industry innovates. Machine builds come with new expectations.

In the midst of the COVID-19 crisis, the only surgical mask manufacturer in Australia, Med-Con, was asked to significantly step up production – from two million to 80 million masks a year. Foodmach stepped up to help increase manufacturing capacity by building seven additional machines. But this was no ordinary order. The challenge: recreate machines that were designed and manufactured 40 years ago.

These builds normally take several months and include drawings and bills of materials. Foodmach had just 60 days and only a model to work with, a model based on 40-year-old parts.

Recreating this machine on today’s standards has been a nail-biting journey with the daily ups and downs detailed in its Project Med-Con Blog. But we’re excited to share it was a resounding success.

More Products 

Contact Us

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng520