OMRON CPM1A-10CDT-A-V1 Programmable Controller
|
OMRON CPM1A-10CDT-A-V1 PROGRAMMABLE CONTROLLER
Product Details One-piece Construction: The CPM1A CPU Units feature a one-piece construction including 10, 20, 30, or 40 built-in I/O terminals. The following three model groups are available: relay output models, sinking transistor output models, and sourcing transistor output models.
Extra I/O Capacity: Up to three Expansion I/O Units can be connected to a CPM1A-30CD-(-V1) or CPM1A-40CD-(-V1) CPU Unit to add an extra 8 or 20 I/O points for each, for a maximum of up to 100 I/O points.
Input Filter Function: The CPM1A is equipped with a filter function to prevent incorrect operation caused by chatter or noise in the input signal. The user can select an input time constant of 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms, or 128 ms.
Low-maintenance Design: Flash memory provides memory backup without a battery. Input Interrupts The CPM1A-10CD-(-V1) CPU Units can handle 2 interrupt inputs; the CPM1A-20CD-(-V1), CPM1A-30CD-(-V1), and CPM1A-40CD-(-V1) CPU Units can handle 4 interrupt inputs. In addition to normal input interrupts, the CPM1A has a counter mode that counts high-speed input signals and triggers interrupts at fixed count multiples.
Quick-response Inputs: Quick-response inputs can detect input signals with a pulse width as short as 0.2 ms regardless of their timing during the PC cycle. Quick-response inputs and interrupt inputs use the same input terminals.
Interval Timer: CPM1A PCs have a high-speed interval timer which can be set from 0.5 ms to 319,968 ms. The timer can be set to trigger a single interrupt (one-shot mode) or repeat scheduled interrupts (scheduled interrupt mode).
High-speed Counter: CPM1A PCs have a high-speed counter that can be used in incremental mode or up/down mode. The high-speed counter can be combined with input interrupts to perform target value control or zone comparison control that isn’t affected by the PC’s cycle time. Pulse Output Function: The CPM1A transistor output models have an output function capable of outputting a pulse of 20 Hz to 2 kHz (single-phase output).
Analog Setting Function: The CPM1A PCs have 2 analog volume controls that can be used to make manual analog settings.
Moore News NONFERROUS INDUSTRY More Products
Contact Us miya@mvme.cn(Click) Email: miya@mvme.cn QQ: 2851195450 Tel: 86-18020776792 Skype: miyazheng52 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: mitsubishi motion controller b&r touch screen |
![]() |
SEW MOVITRAC 31C300-503-4-00 Frequency Inverter 42kva G |
![]() |
MDX61B0005-5A3-4-00 08277303| Frequenzumrichter Movidrive MDX61B0005-5A3-4-00 08277303*NICE QUALITY* |
![]() |
MM07D-503-00 18215017 | Eurodrive Frequenzumrichter MM07D-503-00 18215017 *new packing and good price* |
![]() |
MC07B0008-5A3-4-00| EURODRIVE Frequenzumrichter Movitrac MC07B0008-5A3-4-00*in stock* |
![]() |
3183067861-Kit | EPC50BM M I/O Board 3183067861-KIT *new in stock* |
![]() |
3183065591 | EPC 50 Profibus Board 3183065591 *HIGH QUALITY* |