Pop12 Parker Pop12 | HMI-PLC Based Parker Pop12
Pop12 Operator interface with LC-graphic display
Email:miya@mvme.cn
The Parker Pop panels are designed to be mounted on the front of
some type of enclosure.
The PLC Port is used to communicate with the Compax or with another
type of controller; if the panel is configured as an Pop HMI
client, then this port may be used for the PopNet connection.
Different electrical standards are available for the signals in the
PLC port connector: RS-232, RS-422, RS-485 or Current Loop 20 mA.
The cable used selects the appropriate signals. It is always
necessary to use the correct cable type for on the Compax to be
connected.
| Power supply voltage | DC 18 - 30 V | | Power consumption (1) Back-up battery | 3 V 270mA Lithium, not rechargeable, life about 1 year, user
replaceable, model: CR2430.Replace with same or equivalent battery
with the working temperature of Pop. | | Fuse | overcurrent protection device | | Operating temperature 0 | 0 ÷ +50°C, | | Storage temperature | -20 ÷ +70°C | | Operating/storage humidity | 5 ÷ 95 % RH not-condensing | | Vibrations | 10 ÷ 57 Hz, 0,075 mm peak
57 ÷ 150 Hz, 1 G | | Shock | 50 g, 11 ms, 3 pulses per axis | | Protection class | IP65 front panel | | Keyboard reliability | > 3 million operations |
RELATED PRODUCTS
| AB | 1768-CNB | BENTLY | 125720-01 | | AB | 1768-CNBR | BENTLY | 125760-01 | | AB | 1768-ENBT | BENTLY | 125768-01 | | AB | 1768-EWEB | BENTLY | 125840-02 | | AB | 1768-KY1 | BENTLY | 128240-01 | | AB | 1768-L43 | BENTLY | 133396-01 | | AB | 1768-L43S | BENTLY | 133819-01 | | AB | 1768-L45 | BENTLY | 135137-01 | | AB | 1768-L45S | BENTLY | 136188-02 | | AB | 1768-M04SE | BENTLY | 146031-01 | | AB | 1768-PA3 | BENTLY | 172103-01 |
|
