FIREYE 95UVS2-1 95UVS21 95UVS2 1

FIREYE 95UVS2-1 95UVS21 95UVS2 1

Product Description:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide

the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important

statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length
section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block

descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various
menu levels.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various

operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM

functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e.

“Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

ULTRA 100 and 200 drives are feature-rich, high-performance drives that offer the flexibility to handle a wide range of applications. You can set up the ULTRA 100/200 drives as indexing drives, velocity servo drives, stepper drives, or master encoder followers. With the DeviceNet option, you can remotely commission and reprogram ULTRA 100 drives. In addition, you can use the ULTRA 100/200
drives host command protocol to set up multiple drives. Available in seven power ranges, theULT RA100/200 drives can be mated to four high-performance brushless servo motor lines. Ultra Master software, a Windows-based interface, provides you with a familiar programming environment and a powerful commissioning tool for all ULTRA 100/200 drives.ULTRA 200 positioning drives deliver full-featured flexibility and impressive power and performance. Each ULTRA 200 drive provides:115 to 230V AC single phase input (single phase or three phase for the 75 amp version, three phase only for the 150 amp version) Phase-to-phase and phase-to-ground short circuit protection An internal resistive shunt A built-in auxiliary AC input (to power logic only) Built-in power supplies (including 24V I/O supply)—no external sourcerequired (except AC line) The ability to drive sinusoidal AC brushless motors An DC bus available externally for power leveling or for use of shared power supplies

SMC LVQH50-Z19-1 Manual Operated Viper Valve AMAT 3870-05870 New

SMC VV5Q11-16-DAM00040 16-Port Pneumatic Manifold AMAT 4060-00719 New

SMC US22387 8-Port Pneumatic Manifold EX160-SDN1A Used Working

SMC US3938 13-Port Pneumatic Manifold AMAT 0190-06706 New Surplus

SMC SS5V1-10FD-X119 14-Port Pneumatic Manifold AMAT 4060-00519 New

SMC IR2000-02-M Precision Pneumatic Regulator Manifold AMAT 4060-00717 New

SMC LFU20-Z07-3-X3 Ultrasonic Flow Sensor new

SMC PAF5410S-3S19N-N Process Pump Used

Tylan MFC, FC-260, N2, 300 SCCM, s2683

Tylan MFC, FC-260F, N2, 10 SLPM, s3501

Tylan MFC, FC-260F, N2, 200 SCCM, s1007

Tylan MFC, FC-260, N2, 10 SLPM, s6018

Modutek Microtime T16 Rinse Controller

Novellus 02-158811-00 Main system power panel w/ scrubbed exhaust for PVD REV C

APEX 3513 RFgenerator Power supply A3M3K000EA 120B001A, S6827

APEX 3513 RFgenerator Power supply A3M3K000EA 120B001A, S4865

NEW Mykrolis 2900 MFC FC-2902MEP5-T-4V, N2, 5 SLPM Gas range

New Parker GV-U6R Gemini Servo Controller GV-U6R-11207

Schumacher 1491-1500N bulk Refill controller for Bubbler

AMAT Dual Ribbon cable w/ mesh and shield. 40 pin - 37 pin 14 ft.

Chemraz 9278-SC513, 2-278, Compound 513, 11.984 x 0.139 inch 22-136504-00

Lot of 6 IPEC Speedfam 0230-737543 SMC EX121-SDN1 Device net send unit manifold

NT intergrated flow controller 6500-xx-F03-D12-K-P2-U2-M19, 0-1500 ml/min

NT intergrated flow controller 6500T2-F02-D12-A-P1-U1, 0-250 ml/min, NEW

NEW SWAGELOK 6LVV-ALD6HFR4-P-CS-NV lots of 2

CHNT NB1-63 C1, NB1 CIRCUIT BREAKER

Tylan 2900 series MFC, FC-2900V, Ar, 500 SCCM, S9115

10 new AMAT 3090-00229 BoH Hexagon Head M5 x 3

ALTECH CORP. 8906.6 DIN RAIL FUSE MOUNT TERMINAL, TYPE SAK S3/35, 6675.2

Varian 06887001 Assembly Motor Drive Control

RT0300-2929 MECHANICAL ASSEMBLY

NEW Perlast 22-294910-00 Oring, white perlast, 3.989 x 0.070

VAT RECTANGULAR GATE, SLIT VALVE MONOVAT 0200X-AE24-1002, VARIAN M2000

Lot of 6 LITTELFUSE V251BA60, METAL OXIDE VARISTOR

Novellus 951479 Cable, motor power

Novellus 951337 Cable, motor power

2 PUV0047-5 power supply HOYA-SCHOTT, UV light source,

3 Banner D12SN6FP Fiber Optic sensor switch

Chemraz 9312-SC520, 2-312, Compound 520, 0.600 x 0.210 inch

Bearing, WFR Roller, MESA 2B-10-241, Used, Lot of 4

Nozzle FLT 80787-50 95Deg@500psi, Lot of two, New

7 RF Low freq silver plated connector AMP, 330830 = 5, 330830-8=2

The use of the product:

1.transmission and distribution.

2.Customer service in 1-4 hours. If there's any question, please contact with our sales.

3.Experienced technichal support team.