Allen Bradley Module 1785-L80C15 1785L80C15 AB 1785 L80C15 Processor W/ControlNet

Allen Bradley Modules 1785-L80C15 1785L80C15 AB 1785 L80C15 Processor w/ControlNet

Product Description:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide
the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length
section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various
menu levels.

Related Product Recommendation:

Product's Character:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

1756-IB16D/A Digital Input Module AB
1756-L1/A Logix5550 Processor AB

1756-L1M1/A Logix5550 Processor AB
1756-L1M2/A Logix5550 Processor AB
1756-L1M3/A Logix5550 Logix5550 Processor AB
1756-L55M12/A 1756-L55/A, 1756-M12/A Logix5555 Processor, 750KB memory, Series A AB
1756-L55M13/A 1756-L55/A, 1756-M13/A Logix5555 Processor, 1.5 MB memory, Series A AB
1756-L55M14/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 3.5 MB memory, Series A AB
1756-L55M16/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 7.5 MB memory, Series A AB
1756-L61/A Logix5561 Logix5561 Processor - 2MB AB
1756-L61/B Logix5561 Logix5561 Processor - 2MB AB
1756-L62/A Logix5562 Logix5562 Processor - 4MB Memory AB
1756-L62/B Logix5562 Logix5562 Processor - 4MB Memory AB
1756-OB16E/A Digital Fused Output Module - Series A AB
1756-PA72/A 1756-PA72 Power Supply - Series A AB
1756-PA72/B 1756-PA72 Power Supply - Series B AB
1756-PA72/C 1756-PA72 Power Supply - Series A AB
1761-CBL-PM02 Program Storage Device Cable AB

ICT 4916171 PMT+PRE AMP In-Lens Detector AMAT 50409150000 SemVision cX works

VAT 26324-KA41-0001 HV Angle Valve AMAT SemVision cX used working

A to Z Electronics 50419600200 OMC PCB Chassis AMAT SemVision cX working

A to Z Electronics 50312460100 ETPS Assy AMAT SemVision cX used working

Pneutal SCP-161 10 bar Vacuum Tank AMAT Semvision cX used working

AMAT 0090-A2230 IPU Assy Industrial Computer 0090-A0970 SemVision cX used works

Thermo Electron 8815A-3SUS-SN EDX Sensor AMAT SemVision cX used working

RH Electronics 50419700200 OM Power Supply Cage OMP AMAT SemVision cX used works

CMC AM422670P000 Motion Controller Aximate/C AMAT SEMVision cX used working

Lambda 40935 Power Supply Alpha 400W AMAT SemVision cX working

Varian 9699504S011 Pump Controller & Cables Turbo-V 250 C.U. SemVision cX works

AMAT SemVision Wafer Transfer Arm Assembly AMAT SemVision cX 300mm works 800-494

MKS 41A12DGA2BA010 10 TORR-G Trip Baratron Pressure Switch 100 TORR-G used works

Brooks 6-0001-0817-SP Robot Rail LTRA 042-SBI AMAT SemVision cX working

AMAT SemVision cX SEM Tilt Motor Assembly used working

Opal ETD Board 50312575100 Circuit Board AMAT SemVision cX working

Opal DVD Board 50312540200 Circuit Board AMAT SemVision cX working

The use of the product: