ABB Module PM511V08 3BSE011180R1 ABB PM511V08 3BSE011180-R1 FILTRO
OLIO High quality
Product Description:
he red LED Ovl. goes out when the overloaded output is switched on
again automatically.
The acknowledgement of the error message, i.e. the resetting of the
error flags, is carried out according to chapter B4.8 (Appendix),
Acknowledgement of error messages in the basic unit.The outputs are
safe against reverse polarity and forced supply of 24 V DC. Use of
the digital output signal at the terminal 46
(A 62,00) for the high-speed counter The output A 62,00 can be
assigned to the internal highspeed
counter by configuration. If the counter is used in the operating
modes 1 or 2 (up-counter), the output A 62,00 is only available for
the counter. If the output is to use as a normal digital output, it
has to
be made sure, that the high-speed counter is not configured to the
operating modes 1 or 2 (see also the chapter "High-speed counter").
Related Product Recommendation:
| DSTD132 5716001-FX | DSPC155 57310001-CX | DSQC679 3HAC028357001 |
| DSTD150A 57160001-UH | DSPC172H 57310001-MP | DSQC697 3HAC037084-001 |
| DSTX120 57160001-MA | DSQC 352A | DSSB146 48980001-AP/1 DSSB146*BAT2C |
| ECC 086387-001 | DSQC 539 3HAC14265-1 | DSSR122 48990001-NK |
| ECZ FPR3700001R0001 | DSQC 633A 3HAC031851-001 | DSSR170 48990001-PC |
| EL3020 | DSQC104 6369901-104 | DSTA131 57120001-CV |
| GJR2370500R2 | DSQC201 YB560103-AB | DSTA131 57120001-CV |
| GJV3072403R1 07KR264DR1 07KR264B | DSQC205 YB560103-AD/1 | DSTA160 57120001-AH |
| GJV3074353R1 07EA63R1 | DSQC223 YB560103-BD | DSTA180 57120001-ET |
| HS01 HS 01 | DSQC227 YB560103-BK | DSTC170 57520001-BK |
| ICMK14N1 1SBP260052R1001 | DSQC236G YB560103-CD | DSTC190 57520001-ER |
| ICSA04B5 FPR3341501R1042 | DSQC236T YB560103-CE | DSTC454 5751017-F |
| ICSE08B5 FPR3346501R1012 | DSQC239 YB560103-CH | 3ASC25H705/7 |
| IDS-DTU51 | DSQC325 3HAB2241-1 | 3ASU21C110 LU6278 DCU30/7 |
| IMASI03 | DSQC328A 3HAC17970-1 | 3AUA489002B4562 |
| IMASI23 | DSQC332 3HAB9669-1 | 3BHE022291R0101 PCD230A |
| IMASO11 | DSQC334 3HAB5845-1 | 3BHE023784R2530 |
| IMDSI14 | DSAI130 | 3BHE024577R0101 PP C907 BE |
| IMDSI22 | SNSR-104 | 3BSE001245R1 3BSC640008R1 |
| IMDSO14 | YPQ201A | 3BSE003879R1 |
| IMDSO14 IMDS014 | DSMB175 | 3BSE011316R1 SDCS-PIN-52 |
| IMFCS01 | YPK107E | 3HAC14550-4 |
| IMFEC12 | YPQ202A | 3HAC14551-2 |
| IMMPI01 | DCU30/7 | 3HAC17484-8 |
| DSQC609 3HAC14178-1 | DSAV-111 | 3HAC17484-9 |
| DSQC609 3HAC14178-1 | DSMB175 | 3HNE00313-1 |
Product's Character:
In order to avoid measurement errors, it is absolutely
necessary, to lead the cores to the Pt100 sensors in the
same cable. The cores must have the same cross section.
Per channel, a twisted pair is used (for the two terminals
of the Pt100 sensors) plus a single core (half of a
twisted pair) for the connection to AGND1. Depending on
the configured operating mode, the measured value is assigned
linearly as follows the return wire AGND1. In
the operating mode "Pt100 in 3-wire configuration" two
adjacent analog inputs belong together (e.g. EW 6,00 and EW
6,01). For configuration, both inputs must be configured to
the desired operating mode, see configuration table Fig.
The constant current of the one channel flows
through the Pt100 resistance sensor, the constant current of
the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from
the two voltage drops and stores it under the
odd address
DCS800-S02-1500-06 Module Drive ABB
DCS800-S02-2000-06 Module Drive ABB
DCS800-S02-2000-07 Module Drive ABB
DD 370A GJR2237400R0001, GJR2237400R1 DD370A Diode Module ABB
DD 371a HEIE 420334 R1 DD 371a Module ABB
DDI 01 P 3711-4-0369626 DDI 01 Digital Input Module ABB
DDI 02 0369637M DDI 02 Digital Input Module ABB
DDI 03 0369643M DDI 03 Digital Input Module ABB
DDI 04 0369643M DDI 03 Digital Input Module ABB
DDO 01 P 37151-4-0369627 DDO 01 Digital Ouput Module ABB
DDO 02 P37151-4-0369642 DDO 02 Digital Ouput Module ABB
DDO 03 P37151-4-0369643 Freelance Digital Output Module ABB
DDO 04 0369644M DDO 04 Digital Output Module ABB
DFC 01 37261-4-0369529 FieldController Main Board ABB
DFE 01 P 37262-4-0369565 Ethernet Module 10Base2 ABB
DFI01 P37112-4-036-9681 Pulse Input Module ABB
DFM 11 P 37262-4-0369575 Profibus DPV1 Module ABB
DFM02 DFM 02 Serial Fieldbus Module ABB
DFP 01 P 37264-4-0369562 FieldController Power Supply Module ABB
DI-24-16 DI2416 Digital Input Module ABB
DI-24-32 FDI2432 Digital Input Module ABB
The use of the product:
1.boiler Heating,
2.non-ferrous metal smelting.
3.construction machinery,
Product's advantages:
1.transmission and distribution.
2.Power industry,
3.the elevator industry,
Our advantages:
1.open architecture to take advantage of traditional or renewable
sources of energy!
2.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most items.
3.Customer service in 1-4 hours. If there's any question, please
contact with our sales.
Frequently Asked Questions:
1.Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1
piece .
2.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
3.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
