ABB Module DSMB151 57360001-K ABB DSMB151 MEMORY DISPLAY MODULE new version

ABB Module DSMB151 57360001-K ABB DSMB151 MEMORY DISPLAY MODULE new version

Product Description:

 The SmartMedia Card is inserted with the contact field visible (see the figure obove).A SmartMedia Card, once initialized as user data memory, can no more be used as a user program card.The SmartMedia Card must be protected from mechanical stress (e.g. do not bend) electrostatic discharge contact pollution (do not touch the contacts)2.1.5.3 Access Access within the PLC program is possible with function blocks,The high-speed counter used in the basic unit 07 KT 97 works independently of the user program and is therefore able to response quickly to external signals. It can be used in seven different and configurable operating modes. The desired operating mode is set in a system constant (see documentation part "System technology"). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used (see programming software).

Related Product Recommendation:

Product's Character:

The 07 KT 97 basic unit is equipped with a special parallel interface. It is thus possible to network it with another bus system using an additional communication processor module. The additional communication processor has its own housing. Both housings (of the 07 KT 97 and of the communication
processor) are assembled by means of a snap-on connection.The SmartMedia Card serves for storing data up to 2 MB not being lost over an power OFF/ON cycle. It is used in the 07 KT 97 basic unit. It is recommended only to use ABB-proven SmartMedia Cards. Field of application Storing and loading of PLC programs Storing and loading of user data  there are 250 data segments with 128 blocks
each available (1 block = 32 words). Loading of firmware updates

The use of the product: