ABB Module DSBC110 57310256-E ABB DSBC110 BUS TERMINATION MODULE long life

ABB Module DSBC110 57310256-E ABB DSBC110 BUS TERMINATION MODULE long life

Product Description:

Item n in the table designates the module address that can be set with the address DIL switch with switches 2...7. When using 07 KR 91 / 07 KT 9x as bus master, we recommend to use even-numbered module addresses (08, 10, 12......60).In this setting, (DIL switch 1 in OFF position = factory setting) the module occupies two addresses for inputs and outputs.If the DIL switch 1 is set to ON, the unit is configured solely as an output module. In this case, the addresses for inputs are not needed.Module 07 DC 92 reads the setting of the address switch only during initialization, after switching on the power
supply, meaning that changes of the setting during operation remain ineffective until the next initialization process.

Related Product Recommendation:

Product's Character:

When an overload or short-circuit occurs, the output limits the current and thermically switches it off. The LED of the overloaded output is flashing. After the overload or short-circuit is corrected, the outputs
are switched on again automatically. A manual acknowledgement or one initiated by the user program is not necessary. The error message has to be acknowledged. I/O configuration Module 07 DC 92 does not store configuration data. The 32 configurable channels are defined by the user program
as inputs or outputs, which means that through reading and writing data in the user program, each configurable input/output channel can be used as input, output, or rereadable output.

The use of the product: