ABB Module CI590 3BHT340092R1 ABB CI590 MIXED MODULE High quality

ABB Module CI590 3BHT340092R1 ABB CI590 MIXED MODULE High quality

Product Description:

The digital input/output module 07 DC 92 is used as a remote module on the CS31 system bus. It contains 32 inputs/outputs, 24 V DC, in 4 groups with the following features:The inputs/outputs can be accessed individually as input,as output or as re-readable output (combined input/output)The outputs
work with transistors, have a nominal load rating of 0.5 A and are protected against overload and short circuit.The 4 groups of inputs/outputs are electrically isolated from each other and from the rest of the
unit.The module occupies two digital addresses for inputs and outputs on the CS31 system bus. It is
possible to configure the unit solely as an output module. In this case, the addresses for the inputs
are not needed.

Related Product Recommendation:

Product's Character:

The following has to be observed for project planning and start-up:  Programming is performed using AC31 programming software, which can be run on commercially available IBM compatible PCs (see documentation for the programming system 907 PC 331) The processor processes the user program contained in the RAM. It is loaded into the RAM via the serial interface COM1/COM2 or via the SmartMedia Card and can also be changed there. An additional save command is used to save the program in the Flash EPROM.Note: In the course of the following operations Power ’ON’ RUN/STOP switch from STOP --> RUN Program start-up with programming system  Cold start of the PLC Warm start of the PLC the RAM is overwritten by the contents of the Flash EPROM, if a user program is contained in the Flash EPROM.Online program modification

The use of the product: