ABB Module 89AR30 ABB 89AR30 RELAY CONTROL UNIT Highest version

ABB Module 89AR30 ABB 89AR30 RELAY CONTROL UNIT Highest version

Product Description:

If the address DIL switch No. 8 is switched to ON, all channel numbers change by 08, i.e. address AW n,00 changes to AW n,08, etc. This applies for the address assignments for inputs and outputs in both operation modes.Normal operation After the supply voltage was switched on, the module initializes automatically. During initialization process all LEDs are switched on.If the CS31 system bus does not (yet) run, the red error LED will light up. If an error occurs during the initialization process, the red error LED will also light up.

Related Product Recommendation:

Product's Character:

 Analog value is out of measuring range Storing this information and possibility for recall
(kind of error and location of error) If an error occurs, the red LED lights up. The error message
will be transmitted to the central unit or the coupler.In the central units 07 KR 91 / 07 KT 9x, the errors are displayed as follows:Out of range Error classification 4 (FK4) M 255.14 Error recognition: 10 dec. -> MW 255.08 Module type: * 01/03/05 -> MW 255.09 Group number: -> MW 255.10 Channel number: -> MW 255.11

The use of the product: