ABB Module 3HAC14550-4 ABB 3HAC14550-4 Single Drive Free shipping

ABB Module 3HAC14550-4 ABB 3HAC14550-4 Single Drive Free shipping

Product Description:

Real-time clock LEDs for displaying operating conditions and error messages Detachable screw-type terminal blocks Fastening by screws or by snapping the device onto a DIN rail  The lithium battery 07 LE 90 can be put into the battery compartment in order to store and backup the user program in the RAMstore and backup data which is additionally contained in the RAM, e.g. the status of flags backup the time and date (real-time clock) RUN/STOP switch for starting and aborting the program execution Extensive diagnosis functions self-diagnosis of the basic unit
diagnosis of the CS31 system bus and the connected modules.

Related Product Recommendation:

Product's Character:

The desired operating mode is set in a system constant (see documentation part "System technology"). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used (see programming software).
Independent of the selected operating mode, the following features are valid:The pulses at the counter input or the evaluated signals at tracks A and B in case of connection of incremental position sensors are counted.The maximum counting frequency is 50 kHz.The counter uses the terminals 2 (E 62,00) and 3
(E 62,01) as fast inputs and, in one operating mode,also the output terminal 46 (A 62,00). In order to make all binary inputs and outputs available for other purposes than counting, it is possible, to disable the
07 KT 98’s counting function.

The use of the product: