C Band 75/100GHz 400G Coherent Module QSFP-DD ZR 80~120KM for DCI
Applications This product is a coherent module, compliant with the OIF 400ZR MSA
and QSFP-DD MSA standards, is designed for DCI applications. The
digital diagnostics function is available via an I2C interface, as
specified by the QSFP-DD MSA. The product is a C-band 75G/100 GHz grid coherent optical module
that combines coherent DSP ASIC functionality with best in class
ultra-narrow line-width tunable lasers, high speed modulators and
high responsively coherent receivers to deliver high performance at
400G 16QAM modulation formats (at 60G baud rate). Features - QSFP-DD MSA compliant
- Compliant with OIF 400ZR, version 01.0, March 10, 2020
- Digital diagnostic monitoring support
- Hot pluggable by 76-pin electrical interface
- Maximum power consumption 16.5 W
- 400G 16QAM modulation
- Compact size (18.4 mm x 93.4 mm x 8.5 mm)
- LC duplex connector
- 400GBASE-R, 425 Gbps bit rate
- 400G-AUI-8 C2M; 8 x CEI-56G-VSR PAM-4 electrical interface
- Operating case temperature: 0°C to 70°C
- Single 3.3 V power supply
- RoHS 2 compliant
Optical Characteristics Parameter | Min | Typ | Max | Unit | Conditions | Transmitter | Transmitter frequency range | 191.3 | 193.7 | 196.1 | THz | TU-T grid. Frequency range over which the specifications hold
unless noted otherwise. The frequency is fixed at 193.7 THz for
unamplified link applications. | Transmitter laser frequency stability | -1.8 | | 1.8 | GHz | Offset from channel frequency set point. The receiver LO has the
same frequency accuracy. | Transmitter output power | -10 | | -6 | dBm | Measured at optical connector. | Transmitter output power with TX disabled | | | -20 | dBm | Max Output power with TX_DIS asserted | Transmitter output power during wavelength switching | | | -20 | dBm | | Transmitter reflectance | | | -20 | dBm | Transmitter polarization dependent power | Mean I-Q amplitude imbalance | | | 1 | dB | | Transmitter polarization dependent power | | | 1.5 | dB | Power difference between X and Y polarization | Receiver | Frequency offset between RX and LO | -3.6 | | 3.6 | GHz | Acquisition Range | Input power range | -12 | | 0 | dBm | | Input sensitivity (amplified link application) | -12 | | | dBm | | Input sensitivity (unamplified link application) | -20 | | | dBm | For unamplified link applications, the minimum input power is –20
dBm @receiver OSNR tolerance ≥ 34 dB. | OSNR tolerance (amplified link application) | | | 26 | dB/0.1nm | The OSNR tolerance is referenced to an optical bandwidth of 0.1 nm
@193.7 THz or 12.5 GHz. | OSNR tolerance (unamplified link application) | 34 | | | dB/0.1nm | The OSNR tolerance cannot be less than 34 dB for unamplified link
applications. | Optical return loss | 20 | | | dB | Optical reflectance at connector input | CD Tolerance | 2400 | | | ps/nm | Tolerance to chromatic dispersion | Optical path power penalty | | | 0.5 | dB | OSNR penalty tolerance due to –35 dB interferometric crosstalk and
2400 ps/nm chromatic dispersion. | PMD tolerance | 10 | | | ps | Tolerance to PMD with ≤ 0.5 dB penalty to OSNR sensitivity. 10 ps
of PMD corresponds to max 30 ps of DGD and max 500 ps2 of SOPMD | PDL tolerance (amplified link application) | 3.5 | | | dB | Tolerance to PDL with < 1.3 dB penalty to OSNR sensitivity When
change in PSP is ≤ 1 rad/ms. | PDL tolerance (unamplified link application) | 2.5 | | | dB | The PDL tolerance is 2.5 dB in unamplified link application when
the reciever OSNR sensitivity penalty is 0.8 dB. | Tolerance to change in SOP | 50 | | | krad/s | Tolerance to change in SOP with ≤ 0.5 dB penalty to OSNR
sensitivity. Measurement relative to reference with 10 ps PMD and
2.5 dB PDL and SOP of < 1 rad/ms under the same conditions. | Optical input power transient tolerance | ±2 | | | dB | Tolerance to change in input power with ≤ 0.5 dB penalty to OSNR
sensitivity. Received power is within –12 dBm to 0 dBm. Rise/fall
times of power change defined by 20%–80% of 50 µs or slower. |
Applications Compatibility Hilink optical Transceiver 100% compatibility: Cisco, Huawei, Ciena, H3C, HP, Extreme, Foundry, Brocade, D-link,
Alcatel, Mikrotik, Finisar, Netgear, Nortel, Juniper, Ruijie,
Zyxel, etc.
Hilink Advantage 1. Hilink establish in 2007,Specialize in this field with around
10-year experience. 2."Credit is the basis, quality is the first",all our products are
new,we never use second-hand components. 3. Our products are compatible with Cisco,Huawei, Ciena, H3C, HP,
Extreme, Foundry, Brocade, Dlink, Alcatel, Riverstone, Enterasys, Netgear, Nortel, Juniper, Ruijie, Zyxel, etc. 4. We provide 3 years warranty for all our products from the date
of shipment. 5. All of our products get through CE,ROHS,FCC. 6. We also provide DWDM CWDM WDM with optical solutions. FAQ 1. Can I have a sample order? What is your MOQ? Sample order is supported for testing the quality of goods. 1 piece is the MOQ. Mixed samples are acceptable. 2. What is the lead time? 1-3 days after receiving the payment for the regular goods we normally
keeping in stock; For large quantity, you'll get support and details from your sales
representative of HilinkTech. 3. What is the shipping way and how long is the period?
DHL, UPS, FedEx or TNT will be taken according to your option. The arrival normally takes
3-5 days . 4. What is your warranty?
3-year warranty.You'll get technique support, replacement or refund. Transmitter Transition Time
|