100G CXP MPO Optical Transceiver Module 100GBASE - SR10 CXP Module

100G CXP MPO Optical Transceiver Module 100GBASE - SR10 12 channel

Features

12-channel full-duplex transceiver module

Hot Pluggable CXP footprint

Maximum link length of 300m on OM3 or 400m on OM4 Multimode Fiber (MMF)

Multirate capability: 1.06Gb/s to 10.5Gb/s per channel

Unretimed CPPI electrical interface

Requires 3.3V power supply only

Low power dissipation: <4W

Reliable VCSEL array technology

Built-in digital diagnostic functions DDM

Commercial operating case temperature range: 0°C to 70°C

Single MPO connector receptacle

RoHS-6 Compliant (lead-free)

Applications

100GBASE-SR10 100G Ethernet

Multiple 1G/2G/4G/8G/10G Fibre Channel

Infiniband transmission at 12ch SDR, DDR and QDR

Switches, Routers

Data Centers

Other 120G Interconnect Requirement

Product Details

Description

Hilink’s CXP-MPO121-SR10C CXP transceiver modules is a high performance, low power consumption, long reach interconnect solution supporting 100G Ethernet.

Infiniband QDR,DDR,SDR,1G/2G/4G/8G/10G fiber channel and PCIe.

It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface.

Hilink’s CXP transceiver modulesis an assembly of 12 full-duplexlanes, where each lane is capable of transmitting data at rates up to 10.5Gb/s, providing an aggregated rate of 120Gb/s.

Notes:

1. Transmitter consists of 12 lasers operating at a maximum rate of 10.5Gb/s each.

2. Even if TDP is <0.9dB, the OMA min must exceed this value.

3. RIN is scaled by 10*log (10/4) to maintain SNR outside of transmitter.

4. The Receiver consists of 12 photodetectors operating at a maximum rate of 10.5Gb/s each.