F2-H Face Recognition Device with Human Temperature Measurement and
Access Control
Features
*Dynamic detection, solve the deception of photos on various
carriers
*Infrared mode at night, RGB dual fill light
*Support external access control card reader, QR code scanner, ID
card reader
*Support RS232 serial port, Wiegand 26/34 output, support relay,
exit switch, door magnetic output content
*Support local storage of 500,000 historical records
*Support 20,000 face library
*Support public network and local area network deployment
*Support HTTP interface connection；
*Support display configuration；
*Support identification distance configuration
Face Identification System Product Specification
F2-H Facial Recognition Temperature Measure Device Datasheet-EN | Face Recognition Temperature Measure all-in-one Machine | | Product model | F2-H | Characteristics | Main function | Face recognition temperature measurement | | Use environmen | Indoor , semi-outdoor | | Color | Silver | Camera | Type | RGB | Infrared | | Resolution | 2 million pixels | 2 million pixels | | Aperture | F2.8 | F2.8 | | Focal length | 3.18mm | 3.18mm | Software Dynamic | automatic | automatic | Vertical wide angle | 84° | 84° | Horizontal wide angle | 54° | 54° | Infrared supplement light | Support | White supplement light | Support | Core parameters | Android | Android7.1 | | CPU | Quad-core, 1.8GHz | | storage capacity | RAM 2G ROM 8G | Human-comput er interaction | Monitor | 8 inches, full viewing angle, 170 ° IPS LCD screen, resolution 800 * 1280 | | Touch screen | support | Face sensing module | support | Face temperature measurement module | support,Serial / I2C interface | | Card reader | Support, Optional | Communication method | Ethernet | 10/100 Ethernet | | WIFI | Comply with IEEE802.11b / g / n standard (2.4G) | Identification Method | Face | Support | | IC card | Support, optional | Input output interface | RJ45 interface | Support 10/100 Mbps | Power supply interface | DC12V-2A | | Power | Adapter | DC12V-2A | Environmental requirements | Operating temperature | -20℃～60℃ | Working humidity | 20%~90% (non-condensing) | Static protection level | IEC61000-4-2, LEVEL3 | | External Interface Definition | | Type | Interface | Explanation | | USB | USB 2.0 | Support | | Ethernet port | RJ45 | 10/100 Ethernet | Relay | NC COM NO | Relay normal off/Common/normal on.Usually,door lock supply is
positively connected to the COM port,and then according to the door
lock type,relay power negatively connected NO port or NC port. Note: Maximum load of relay contact is 2A | Gate sensor | IN GND | Check door open/close status, input | Exit button | PUSH1 GND | Press the button,door opening control signal,input | Serial | RX TX | RS232 | Output power | 5V GND | Support device external output 5V | Wiegand | WG_D1 WG_D0 GND | Wiegand output interface, support 26bit / 34bit protocol | Input power | GND 12V+ | Power input:12V DC | Temperature measurement module | Operating temperature | 0℃ ~ +55℃ | | Storage temperature | -20℃ ~ +65℃ | | Power consumption | < 0.3w | Basic Parameters | Pixel | 32*32 Real-time temperature output | | Measurement accuracy | I + 0.5℃ | | Measuring distance | 0.3 ~ 1.0m | WIFI | 2.4G 802.11b/g/n | Bluetooth | BluetooH4.0 |
|
