251 - 260 of 674
vertical flame test equipment
Selling leads
|
...according to the requirements of IEC60335-2-2/GB4706.7:201.102 and UL1017-8.14.2.2. During the test, one end of the current-carrying hose is fixed ...
2025-06-20 20:21:17
|
|
Three vertical bar signal’ shall be used as defined in 3.2.1.3 of IEC 60107-1:1997 3.2.1 .3 Three vertical bar signal The three vertical bar signal ...
2025-06-20 20:18:58
|
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the ...
2025-07-21 00:07:42
|
|
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of ...
2024-12-09 17:19:27
|
|
...test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure for detecting ...
2024-12-09 18:11:00
|
|
... same as the original bolt that connects the down rod to the motor b diameter 50 % “a” Kingpo Technology Development Limited is a pioneer and ...
2024-12-09 19:03:30
|
|
... Test Fixture Table D-1 Force and Moment Requirements Receptacle configuration with respect to mounting surface Force at 15 mm from receptacle ...
2025-06-20 20:18:48
|
|
... System Model: CMT-2010AS Product introduction: CMT-2010AS DC brushless motor comprehensive test bench can test voltage, current, input/output ...
2024-12-09 17:56:37
|
|
...test method , 75mm width, several weights, scale, timer 8.8.2 Test method A weight shall be uniformly applied over a 75 mm width at the centre of ...
2025-06-20 20:18:35
|
|
...BB.3 Equipment for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according ...
2025-07-21 00:07:43
|