Tungsten Carbide Centre Punch For IEC62368-1 T.10 Glass Fragmentation Test
|
|
Centre punch for IEC62368-1 T.10 Glass fragmentation test
The test sample is supported over its whole area and precautions
shall be taken to ensure that particles will not be scattered upon
fragmentation. Then the test sample is shattered with a centre
punch placed approximately 15 mm in from the midpoint of one of the
longer edges of the test sample. After a maximum of 5 min of
fracture, and without using any aid to vision,except spectacles if
normally worn, the particles are counted in a square of 50 mm side
located approximately at the centre of the area of coarsest
fracture and excluding any area
The test sample shall fragment in such a way that the number of
particles counted in a square
The sample under test is broken by means of a test punch having a
head with a mass of 75 g
|
| Product Tags: av test equipment tv signal tester |
|
Durable Electronic Pulse Generator IEC 62368-1 Figure D.3 Compliant for Industrial Applications |
|
IEC62368 G.9/Table G.11 Integrated Circuit IC Current Limiters Tester Ensure Compliance and Safety |
|
Test Pulse Waveform 10/700uS and Continuously Set Protection Values for IEC62368 Test Equipment |
|
Partial Voltage Ratio of Monitoring Output 1 ≤ 1000 IEC62368 Test Equipment with Continuously set protection values |
|
50 Hz ±2 Hz Working Power High Voltage Impulse Generator with Positive and Negative Alternating Switching |
|
High Voltage Impulse Test for Testing Pulse Waveform 2 0-6kV Output Pulse Voltage Range 400VA Transformer Power |