220V 50Hz Axial Force Tester , Environmental Luminaries Test Equipment
|
IEC60598-1 | Fluorescent Lamp Holder Axial Force Tester Luminaries Test Equipment
Product information:
The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4. It relates to an axial force testing device for a fluorescent lamp holder. The axial force testing device is characterized by comprising a base, wherein a test seat for positioning the lamp holder is arranged in the middle of the base, one side of the test seat is provided with a range finder, the other side of the test seat is provided with a linear guide rail, a thrust seat is installed on a sliding block of the linear guide rail, a pressure sensor and a test pressure head are installed on the thrust seat, and a stepping motor is connected with the thrust seat through a screw rod and a screw rod nut.
Technical parameters:
|
||||||||
| Product Tags: led testing equipment led lamp testing equipment |
|
IEC62560-1 Figure 8 Test Circuit For Non-Dimmable Lamp At Dimmer Or Electronic Switch |
|
Wheeled Ride - On Toy Bicycle Dynamic Strength Tester 2m/s GB 6675.2 EN 71-1 |
|
EN 71-1 ASTM F963 Light Testing Equipment , Toy Safety Sharp Edge Test Device |
|
IEC 62262 IK Pendulum Hammer , Pendulum Impact Hammer For Specifying Enclosure Capacity |
|
IEC61215-2 Cord Anchorage Pull Tester For Non - Detachable And Movable Power Cord |
|
IEC61215-2-MQT14.2 Power Cord Torsion Tester For Torque Test After Retention Test. |