Flexible Cable Testing Equipment , Flexing Test Apparatus 2- 40A Adjustable
|
|
Flexible Cable Testing Equipment Flexing Test Apparatus 0 - 50A Adjustable
Product information:
This cable tester is designed and manufactured in accordance with the standard requirement of IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables.
This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a different diameter from pulleys A and B, but all four pulleys shall be so arranged that the sample is horizontal between them. The carrier makes cycles (forward and backward movements) over a distance of 1 m at an approximately constant speed of 0,33m/s between each reversal of the direction of movement.
Technical parameters:
|
||||||||||||||||||
| Product Tags: High Frequency Spark Tester Bend Test Machine |
|
UL 60335-2-24 Figure 101.DVA.2 Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age |
|
UL 60335-2-24 Figure 101.DVA.1 Articulate Test Finger Probe With Flat And Cone Shaped Hand 3.5 – 4.5 Year Age |
|
IEC60335-1 Clause 22.16 Automatic Cord Reels Endurance Test Cord Winding Test Device |
|
IEC60335-1 Stability Test Turn Table With Digital Inclinometer / Inclined Plane Device |
|
IEC60851-3 Standard Mandrel Jig Machine Setup High Performance Long Life Use |
|
Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product |