Abet5015AG Cable Testing Equipment / High Frequency Spark Tester 200mm*300mm
|
Abet5015AG Power Frequency Spark Tester
Description:
Suitable for three single twister and cable machine, line to center height of 1 M plus or minus 20% can be adjusted(special height made to order). This abet50AC series power frequency spark tester used for detection of all kinds of electric wire electric cable bare copper, broken skin, pinhole, etc insulation fault point. Test voltage:0-15KV Test speed:100-360m/min Test cable number: within 3 Test singal conduction diameter:ø0.1-ø5.0mm Electrode:200mm*300mm Power supply:AC220V Test twisted conduction diameter:30.0
1. comply with the requirements of GB/3048.9-94. JB472810,VD0281,EN50356,BS5099,CCC and so on standards. Detection sensitivity<600UA. 2. Meet the requiremetns of UL1581-1990. 3. this instrument adopt oil-immersed or epoxy resin casting
ignition coil, product can be detected with water, and a self-test
device can detect weather the instrument is working
properly(breakdown, counting, sound and light alarm).(Power supply
220V)
|
| Product Tags: Flexing Test Apparatus Bend Test Machine |
|
UL 60335-2-24 Figure 101.DVA.2 Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age |
|
UL 60335-2-24 Figure 101.DVA.1 Articulate Test Finger Probe With Flat And Cone Shaped Hand 3.5 – 4.5 Year Age |
|
IEC60335-1 Clause 22.16 Automatic Cord Reels Endurance Test Cord Winding Test Device |
|
IEC60335-1 Stability Test Turn Table With Digital Inclinometer / Inclined Plane Device |
|
IEC60851-3 Standard Mandrel Jig Machine Setup High Performance Long Life Use |
|
Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product |