Test Probe D, IEC60529 Test Wire 1.0mm, IP4X

Test Probe D,  ​IEC60529 Test Wire 1.0mm, IP4X

Introduction:

1,According to: IEC61032:1997,IEC60529,IEC62368-1

2,Test Probe D is a necessary appliance for domestic and similar electrical appliance of against electric shock protection test.

Technical parameters

1, Test Probe Length :100mm

2, Test Probe Diameter:1.0mm

3,Dam- sphere Diameter:35mm

4,Handle Diameter:10mm

5,Handle Length 100mm

6, According to IEC61032 figure 4 (the Test probe D)

Application:

1, Standard test refers to the joint part can't touch the live parts or approachi to the hazardous parts, 30mm circular baffle cannot enter .

2,In the test requirement for preventing from approaching to the hazardous parts, Test Probe D need to exert a thrust 1±0.1N

The calibration data

Packaging and Shipping

1. Aluminium box and carton box, careful and tight package, make sure the package is intact.

2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order.

3. The shipping time is different, it depends on the distance bewteen us. At usual, exclude the preparing time, the goods would be sent to you in 5days.