Cutting Edges E27 Lamp Holder Gauge For Detecting Side Contacts
|
|
E27 Lampholder Gauges | Gauge for Detecting Side-contacts with Cutting-Edges in Lampholders E27 | 7006-22B-1
Purpose:
to detect the existance of cutting-edges on side-contact in E27 lamp holder.
Testing:
the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in a horizontal position and the plunger-face is held against the helder contacts. In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions. After this test the combination is placed with the plunger in a vertical position and the plunger-face is pressed against the holder contacts with a total force of 10N. In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions. The lampholder complies if the torque applied for both tests does not exceed 0.4Nm.
Related gauges for E27 lamp holder:
|
|||||||||||||||
| Product Tags: Go No Go Gauge Iec 60061 3 |
|
IEC_62133-2 21A_620e_FDIS Small Cell And Battery Equipment With Calibration Certificate |
|
E40 Lamp cap gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 |
|
E40 Lamp cap gauge | Not go gauges for screw threads of lampholders E40 | 7006-26-4 |
|
E40 Lamp cap gauge | Go gauges for screw threads of lampholders E40 | 7006-25-7 |
|
GU10 Lamp cap gauge | Go and not go gauge for bases GU10 | 7006-121-1 |
|
GX53 Lamp cap gauge | "NOT GO" Gauge For Checking Keyways in Caps GX53 | 7006-142F-1 |