DIN Rack Install Subscriber Terminal Block VX module With / Without Protection

Browse Categories

Cixi Anshi Communication Equipment Co.,Ltd

Province/State:zhejiang

Country/Region:china

Tel:86--18667824997

Contact Person:
Miss.Lulu Cen View Contact Details

Brand Name	ANSHI
Model Number	AS-STB-P-1
Certification	ROHS, ISO9001
Place of Origin	China
Minimum Order Quantity	200
Price	Negotiable
Supply Ability	5000pcs/week
name	VX module
Environment condition	5-40 degree Celsius ，Relative humidity <85% (+30 degree Celsius)，Atmospheric pressure, 70-106KPa
plate	silver 20-40uinch
pulling-out force	not less than 25N
standard	GB/T 5169.7-1985
material	pc
install	DIN rack
Protective	GDT

Detailed Product Description

Subscriber Terminal Block STB module with / without protection against over voltage

Applications and feature:

- STB is a high reliability connection module, designed to withstand all existing climates.

- Watertight by design, it provides the best service for the following applications:

- Interface boxes UG/Aerial/Networks

- Distribution points

-Customer termination devices

- Fits on DIN 35 rails

- Very compact, overall dimensions allow to replace existing won protected solution by a high reliability solution.

- No special tool required, only by a standard screw driver.

Range of the section:	diameter 0,4… 1,2 mm
Diameter on the isolation:	it is maximal 5 mm
The current-response characteristics:	20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module
Insulation resistance
“Dry” atmosphere:	> 10 12 Ohm
“Moist” atmosphere (standard ASTM Of d618, procedure F):	> 10 12 Om
Salt fog: (standard ASTM Of b117)	> 10 10 Ohm
Immersion beside the water: (15 days before 3% solution Of naCI)	> 10 10 0m
The contact resistance
R of material + R of the contact cross connection + by R of the contact connection of the wires	< 10 m
Increase in the contact resistance
After climatic testings:	<2,5 m
After 50 connections - turning offs:	<2,5 m
Dielectric strength:	>3 kV of direct current during 1 minute

Mechanical characteristics

Screw of the connection of the pair of the distributive wire:	Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat
Housing of the unit of the connection	Transparent polycarbonate
the distributive wire: Housing:	Polycarbonate, glass-reinforced, resistance to fire “VO”
Fitted contacts:	Tinplated phosphor bronze
Contacts of the grounding:	Alloy Cu - Zn - Ni - Ag
Contacts of the connection:	Tinplated solid bronze
Sealing material before the lower part:	The epoxy resin
Sealing material before the upper cable part:	Silicon compound
Cover of the pair of the distributive wire:	Polycarbonate
Housing of the insertable module:	Polycarbonate, glass-reinforced, resistance to fire “VO”
Sealing material of the insertable module:	Gel
The ring gasket:	Elastomer EPDM
Spring:	the stainless steel
Cable laying is the distributive wire:	Thermoplastic rubber

Product Tags: vx module telecom distribution box

Related Products

5 Paris Cable Distribution Box Terminal Block

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Cixi Anshi Communication Equipment Co.,Ltd
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!