Features:
1) Temperature: -5 - 40°C
2) Relative humidity: <85% (+30°C)
3) Atmospheric pressure: 70 106KPa
4) Material: stainless steel and cuprum, cuprum gold plating over
nickel
5) Performance of anti-burn: PPT (UL94V-0) or anti-burn ABS
(UL94V-0),
combustibility of GB/T 5169.7-1985 standard
6) Construction features: adopts modularization design, elegant
outlook and high endurance
7) Pulling-out force: tin bronze and silver plating (20 - 40uinch),
pulling-out
force not less than 25N
8) Intermediate resistance between reed terminators: no more than
7m
(ohm between intermediate reeds under standard examination
condition)
9) Intermediate resistance: no more than 3m ohm under standard
examination condition
10) Performance impedance: 120Ω (balance)
11) Work rate: 2mb/s
12) Insulation resistance: 1,000mΩ / 500V (DC)
13) Resistance to voltage: no breakdown or arc for 1 minute under
1kV (DC)
14) Crosstalk ratio: ≥60dB (50kHz - 210MHz)
15) Plug-in loss: ≤0.4dB (50kHz - 210MHz)
16) Back wave loss: ≥18dB (50kHz - 210MHz)
17) Life: 200 cycles
Specification:
| Mechanical Performance | Insertion force : 40~75N |
| Pull Out Force : F≥25N(axial) F≥7.5N(radial) |
| IDC Life : 200 times(20-26 AWG Solid wire) minimum |
| Copper Conductor Diameter: Φ0.4~Φ0.8(mm) |
| Environment Characteristic | Storage Tempreture: 40 to 70°C |
| Operating Temperature : 10 to 60°C |
| Relative Humidity: 95%, noncondition |
| Electrical Performance | Insulation resistance: 1000 Mohms minimum |
| Contact resistance:7 mohms maximum |
Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s |
