M6 Threaded Tension Load Cell 200kg 100kg Pull Load cell 50kg 20kg
10kg
Miniature Tension Compression Load Cell FSSH is made from stainless steel based on strain gauge technology
intended for both compression and traction force measurement. The
junior S beam load cell series provide accuracy, compact design
features, and a wide capacity range available in 10kgf, 20kgf,
50kgf, 100kgf and 200kgf. Small size push/pull load cell FSSH
consists of a Wheatstone full bridge to deliver mV/V output
proportional to the force applied. The M6 tapped holes located on
each side of the transducer can be used to mount attachments or
implements to adapt to different applications in force detecting
and auto processing sections. The compact design enables Micro
Force Sensor FSSH to be easily embedded into machinery or test
equipment – ideal for packaging machinery, assembly machinery or
end-of-line test equipment. Miniature force transducer FSSH is
ideally suited for applications where mounting space is limited,
typical applications include spring testing, connector insertion
and withdrawal force measurement, force gauges, tribometers, auto
process control, press fit verification and so on. Forsentek can
also provide custom design service as per client’s request.
Dimensions
Ordering code of miniature tension compression load cell FSSH
| Ordering code | Measuring Range | Force direction |
| FSSH-100N | 0-100N / 0-10kgf | Traction and Compression |
| FSSH-200N | 0-200N / 0-20kgf |
| FSSH-500N | 0-500N / 0-50kgf |
| FSSH-1kN | 0-1000N / 0-100kgf |
| FSSH-2kN | 0-2000N / 0-200kgf |
Specifications
| Capacity | 100N / 10kg / 22 lbs 200N / 20kg / 45lbs 500N / 50kg / 112lbf 1kN / 100kg / 225lb 2kN / 200kg / 450lbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% of R.O. |
| Hysteresis | ±0.1% of R.O. |
| Nonrepeatability | ±0.05% of R.O. |
| Creep(5min) | ±0.05% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 355±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation input+ Black--Excitation input- Green--Signal output+ White--Signal output- |
M6 Threaded Tension Load Cell 10kg 20kg 50kg Pull Load cell 100kg
200kg
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force. The acting force
causes deformation of the measuring element, the bonded strain
gauge deforms accordingly which will cause the resistance change of
the wheatstone bridge, under constant power supply, the output
signal between Sig+ and Sig- will change proportionally, thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Miniature Junior S beam Load Cell FSSH is
around 2.0mV/V.
Power supply of Tension Compression Load Cell FSSH is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Tension Compression Sensor FSSH is normally
within -30mV...+30mV for bidirectional force measurement.
Example: Miniature Traction and compression Sensor FSSH-200N with
2.0mV/V sensitivity powered by 5V DC ,the output range is
-10mV...+10mV.
A signal conditioner can be used with force transducer FSSH to
deliver -5~5V, 0-10V or 4-20mA output.
Example: Micro Push/pull load cell FSSH-500N working with -5-5V
amplifier, the Force-Voltage relationship will be 0-500N
compression load VS 0-5V output, 0-500N traction load VS 0-(-5V)
output, which is linear regardless of the measurement error. When
you get 2V output, it means the current load is 200N compressive
force, when you get -3V output, it means the current load is 300N
tensile load.
Click here to download datasheet
