Actuator Thrust Measurement 100kN Oil Cylinder Thrust Force Sensor
50kN
Column Type Load Cell FFQ is made of stainless steel utilizing strain gauge
technology to deliver mV/V output from the full wheatstone bridge.
Flanged Column Type Force Sensor FFQ offers 0-50kg /
0-100kg / 0-200kg / 0-300kg / 0-500kg / 0-1000kg / 0-2000kg / 0-3000kg / 0-5000kg / 0-10ton ten rated measuring ranges to choose from, Column type force
transducer FFQ is designed for both traction and compression force
measurement with flange-to-flange configuration. Flange Mounted Force Sensor FFQ is suitable for applications such as robot grinding
force monitoring, cylinder thrust measurement, assembly force
monitoring, bearing press fit measurement, welding clamping force
control, hand press force verification, injection molding machine
extrusion force measurement and so on. In addition to the standard
specifications, Forsentek is also capable of and willing to provide
load cell custom design service to meet requirements of different
applications.
Specifications
| Capacity | 50kg / 500N / 110lbf 100kg / 1kN / 220 lbf 200kg / 2kN / 450 lb 300kg / 3kN / 660lb 500kg / 5kN / 1.1klb 1000kg / 10kN / 2.2klb 2000kg / 20kN / 4.4klb 3000kg / 30kN / 6.6klb 5000kg / 50kN / 11klb 10ton/ 100kN / 22klb |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø4.2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Output signal of load cell:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Flanged Force Transducer FFQ is normally around
1.5mV/V.
Power supply of Flange Type Force Sensor FFQ is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of Traction/Compression Force Sensor FFQ is
normally within -22.5mV…+22.5mV.
Example one: Tensile compressive force transducer FFQ-100kN with
1.5mV/V sensitivity powered by 10V DC,the output range is
-15mV...+15mV.
Example two: Tension And Compression Load Cell FFQ-50kN with
1.4mV/V rated output powered by 5V DC,the output range is
-7mV...+7mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver -5~5V, 0-10V or 4-20mA output.
Example one: Flange Type Tension Compression Sensor FFQ-100kN
working with amplifier FSC(-10-10V)-24V,the Load-Voltage
relationship will be 0-100kN compression force VS 0-10V output,
0-100kN tensile force VS 0-(-10V) output, which is linear
regardless of the measurement error, 1V output corresponds to 10kN
compressive load, (-2V) output corresponds to 20kN traction load,
and so on.
Example two: Column Type Tension and Compression Load Cell
FFQ-100kN working with amplifier FSC(4-12-20mA)-24V,the
Force-Current relationship will be 0-100kN compression force VS
12-20mA output, 0-100kN tension force VS 12-4mA, which is linear
regardless of the measurement error, 12mA output corresponds to “0”
load, 12.8mA output corresponds to 10kN compressive load, 8mA
output corresponds to 50kN tensile load, and so on.
Actuator Thrust Measurement 100kN Oil Cylinder Thrust Force Sensor
50kN
Click here to download datasheet
