500N Compression Traction Force Sensor 1kN Traction Load Cell 2kN
M8 Threaded Compression And Traction Force Sensor FSSG offers a
compact design for a variety of applications. the S Beam Load Cell
series provides accuracy, compact design features.The miniature
s-beam traction force load cell FSSG utilizes metal foil strain
gauge technology to deliver 2.0mV/V output with maximum 0.2%
non-linearity of the rated output,the compact design enables the
traction force transducer FSSG to be easily embedded into machinery
or test equipment – ideal for packaging machinery, assembly
machinery or end-of-line test equipment. The Traction Load Cell
FSSG features M8 threaded holes on two sides for the mounting
of attachments or implements, this micro force sensor can be used
for both tension and compression force measurement in applications
with limited space. Small size traction compression load cell FSSG
is widely used for force gauges, tension meters, switch insertion
force measurement, keyboard testing, spring testing, syringe
testing, touchpad testing, cylinder thrust measurement and so on.
small tension force load cell FSSG offers 0-500N / 0-1kN /
0-2kN three rated measuring ranges to choose from, besides the
standard specifications, miniature push pull load cell FSSG
can also be modified or customized according to clients'
requirements.
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the mV/V output signal from
the wheatstone bridge of the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of compression traction force transducer FSSG is
normally around 2.0mV/V.
Power supply of push pull load cell FSSG is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of compression and traction force sensor FSSG
is normally within -30mV...+30mV for push and pull force
measurement.
Example Miniature S type traction load cell FSSG-2kN with 2.0mV/V
sensitivity powered by 10V DC,the output range is -20mV...+20mV.
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: Compression And Traction Load Cell FSSG-1kN working with
-10-10 amplifier,the Force-Voltage relationship will be 0-1000N
compression load VS 0-10V output, 0-1000N traction force VS
0-(-10V) output.
Specifications
Rated Capacity | 500N / 1000N / 2000N 50kg / 100kg / 200kg 110lb / 220lbf / 450lbs |
Rated output | 2.0 mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.2% of rated caapcity |
Hysteresis | ±0.2% of rated caapcity |
Nonrepeatability | ±0.1% of rated caapcity |
Creep(5min) | ±0.05% of rated caapcity |
Safe overload | 150% of rated caapcity |
Ultimate overload | 200% of rated caapcity |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% of R.O./oC |
Temperature shift span | ±0.02% of R.O./oC |
Input resistance | 380±30 ohms |
Output resistance | 355±5 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP65 |
Material of element | Stainless steel |
Cable | Ø3*4000mm 4-core shielded |
Wiring code | Compression@ Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Ordering code: FSSG-500N, FSSG-1kN,
FSSG-2kN
Click here to download datasheet