50kg Traction Load Cell 100kg Compression And Traction Load Cell
200kg
M8 Threaded Compression And Traction Load Cell FSSG offers a
compact design for a variety of applications. the S Beam Load Cell
series provides accuracy, compact design features.The miniature
s-beam traction force load cell FSSG utilizes metal foil strain
gauge technology to deliver 2.0mV/V output with maximum 0.2%
non-linearity of the rated output,the compact design enables the
traction force sensor FSSG to be easily embedded into machinery or
test equipment – ideal for packaging machinery, assembly machinery
or end-of-line test equipment. The sensor features M8 threaded
holes on two sides for the mounting of attachments or implements,
this micro force sensor can be used for both tension and
compression force measurement in applications with limited space.
Small size traction compression load cell FSSG is widely used for
force gauges, tension meters, switch insertion force measurement,
keyboard testing, spring testing, syringe testing, touchpad
testing, cylinder thrust measurement and so on. S type load cell
FSSG offers 0-50kg / 0-100kg / 0-200kg three different measuring
ranges to choose from, besides the standard specifications, model
FSSG can also be modified or customized according to clients'
requirements.
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the mV/V output signal from
the wheatstone bridge of the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of traction compression force transducer FSSG is
normally around 2.0mV/V.
Power supply of push pull load cell FSSG is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of compression and traction force sensor FSSG
is normally within -30mV...+30mV for push and pull force
measurement.
Example Miniature S type traction load cell FSSG-1kN with 2.0mV/V
sensitivity powered by 10V DC,the output range is -20mV...+20mV.
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: FSSG-2kN working with -10-10 amplifier,the Force-Voltage
relationship will be 0-2000N compression load VS 0-10V output,
0-2000N traction force VS 0-(-10V) output,when you get 5V output,it
means the current load is 1000N compression force,when you get -3V
output,it means the current load is 600N tension force,and so on.
Ordering code:FSSG-500N, FSSG-1kN,
FSSG-2kN
Specifications
| Capacity | 500N / 1000N / 2000N
50kg / 100kg / 200kg
110lb / 220lbs / 450lbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% of R.O. |
| Hysteresis | ±0.2% of R.O. |
| Nonrepeatability | ±0.1% of R.O. |
| Creep(5min) | ±0.05% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 355±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded |
| Wiring code | Compression@
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Click here to download datasheet
