Miniature Button Load Cell 500kg 200kg 100kg 50kg 20kg 10kg
Compression Sensor
Miniature Compression Type Button Load Cell FCLB is made of stainless steel based on strain gauge
technology which offers 0-5kg / 0-10kg / 0-20kg / 0-50kg / 0-100kg
/ 0-200kg / 0-500kg seven rated measuring ranges to choose
from,compact design makes button type load cell FCLB suitable for
compression force measurement applications with limited mounting
space. Each sensor comes with a 4-meter-long shielded cable, 4xM2.5
threaded holes located on the bottom make it easy to mount force
sensor FCLB to a flat platform,you may find Miniature Load Cell
FCLB suitable for applications such as load distribution analysis,
mold pressure measurement, force overload protection, clamping
force measurement, assembly force monitoring, hydraulics force
control and so on.
Dimensions(unit in "mm")
Specifications
| Capacity | 50N / 5kg / 11lb 100N / 10kg / 22 lb 200N / 20kg / 45lb 500N / 50kg / 112lbf 1kN / 100kg / 224 lbf 2kN / 200kg / 450 lb 5kN / 500kg / 1124 lbf |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell. Miniature Button Load Cell FCLB is designed to measure force in compression
direction,outputs millivolt signal within 0~20mV, and signal
amplification may be required for most applications, a load cell
signal conditioner can be used to convert mV signal into -5-5V,
0-10V or 4-20mA output which is proportional to applied
force.Taking FCLB-1kN working with amplifier FSC(0-10V)-24V for
example, the load-voltage relationship will be 0-1000N compression
force VS 0-10V output, the amplified output then can be easily
processed by PLCs and data acquisition software. The force can also
be displayed through force indicator,force meter FPT is integrated
with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed
up to 960Hz makes it suitable for both static and dynamic
measurement;FPT also supports Modbus RTU protocol with RS485 or
RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or
4-20mA is also achievable from FPT.
Miniature Button Type Load Cell 500kg 200kg 100kg 50kg 20kg 10kg
Compression Loadcell
Click here to download datasheet
