M5/M6 Rod End Tension Compression Transducer 1kN 500N 200N 100N 50N
Threaded in-line Tension Compression Sensor FL25 is made of 17-4 stainless steel and CE certified.In-line
force transducer FL25 offers rugged structure for industrial
applications.Inline load cells are designed to be mounted inline to
the load axis for both tension and compression force measurement.The force sensor FL25 can be easily mounted to existing system
through M5 or M6 threaded rods located on both sides of the
transducer,these metric threads can also be used to mount
attachments,such as female eye bolt,bolt adapter,etc.,to fit
different usage requirements. Tension and Compression Force
Transducer FL25 uses metal foil strain gauge technology to deliver
2.0mV/V rated output with 5kg / 10kg / 20kg / 30kg / 50kg / 60kg /
100kg seven rated capacities to choose from. Each sensor is
integrated with a 4-meter-long 4-core shielded cable,the cable
comes with a free end which makes it easy to assemble any types of
connectors for electrical connection. In-line Load Cell FL25 is normally used for press-in force measurement, cylinder
push pull force measurement, auto equipment,production line, hand
press machine.etc.
Dimensions
Specifications
| Rated capacity | 50N / 5kg / 11 lb 100N / 10kg / 22 lb 200N / 20kg / 44lb 300N / 30kg / 66 lb 500N / 50kg / 110 lb 600N / 60kg / 132 lbf 1KN / 100kg / 220lb |
| Rated output | 2.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% of R.O. |
| Hysteresis | ±0.5% of R.O. |
| Nonrepeatability | ±0.2% of R.O. |
| Creep(10min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 700±30 ohms |
| Output resistance | 700±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
A load cell is a transducer that converts load or force acting on
it into electronic signal which is proportional to the applied
force.The acting force causes deformation of the measuring
element,the bonded strain gage deforms accordingly which will cause
the resistance change of the wheatstone bridge,under constant power
supply,the output signal between Sig+ and Sig- will change
proportionally,thus the load/force can be measured by measuring the
output signal from the load cell.Threaded rod end tension compression load cell FL25 is designed to measure both tension and compression
force,outputs millivolt signal ranging -20~20mV, and signal
amplification may be required for most applications, a load cell
signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal
which is proportional to applied force.The amplified output is can
be easily processed by PLCs and data acquisition software.The
applied force can be displayed through a force indicator,force
indicator FPT is integrated with high accuracy/low noise 24 bit
Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for
both static and dynamic measurement;FPT also supports Modbus RTU
protocol with RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Click here to download datasheet
