|
10-12T/day quinoa processing line |
| No. | machine | Model | QTY | Power (KW) | Remarks |
| Unit | Total |
| 一 | Cleaning section |
| 1 | Bucket elevator | TDTG20/9 | 1pc | 0.75 | 0.75 | Barrel cold-rolled plate ≥1.5mm/Q235, head and tail 4mm/Q235 plate
production, cover plate 2mm, the periphery adopts occlusal
technology, high-strength bucket belt,strong rigidity |
| 2 | Combined destoner | TQLQ-85 | 1pc | 0.16*2 | 0.32 | The motor adopts domestic first-line brand vibration motor, the
motor base is cut with 10mm national standard steel plate, the
frame is welded with national standard 3mm profile, and the rubber
spring is made of imported engineering rubber. |
| 3 | Direct-connected air blower | TGFZ-5L | 1pc | 0.75 | 0.75 | 1. Natural aging treatment, impeller grinder technology 2. Case
HT-250 roll carburizing and quenching treatment 3. Good closed air
effect, no material leakage |
| 4 | Low pressure fan | 4-72№4A | 1pc | 5.5 | 5.5 | The motor adopts the domestic first-line brand, the frame adopts
the national standard 3mm profile welding, the body adopts the
national standard 3mm steel plate cutting and welding, the fan
impeller is adjusted by dynamic balance, and the vibration
reduction device is installed. |
| 5 | Low-pressure wind network | | 1 set | | | Carbon steel material (thickness t≥1.2mm) spray treatment |
| 6 | Quadruple dust collector | φ600 | 1 pc | | 0 | Carbon steel material (thickness t≥1.5mm) spray treatment |
| 7 | Total | | | | 7.32 | |
| 二 | milling and finished product collection section |
| 1 | Bucket elevator | TDTG20/9 | 6pcs | 0.75 | 4.5 | Barrel cold-rolled plate ≥1.5mm/Q235, head and tail 4mm/Q235 plate
production, cover plate 2mm, the periphery adopts occlusal
technology, high-strength bucket belt, bucket, strong rigidity |
| 2 | Peeling polishing machine | NF-150 | 2pcs | 18.5 | 37 | The frame adopts 6mm national standard Q235 plate laser cutting and
welding. The main shaft is made of 45# steel and tempered by heat
treatment. The equipment adopts axial double air inlet design and
is equipped with a strong exhaust system. The temperature low and
the chaff discharge effect is good. The feed inlet is controlled by
a gear drive mechanism, and the feeding operation is convenient and
accurate. The motor adopts Anhui Wannan motor, equipped with a wind
pressure monitoring device, which is convenient for online control
of the negative pressure in the machine, and keeps the negative
pressure stable in the milling room. The bearings are based on
Jiangsu Renben. |
| 3 | Suction separator | TXFL45 | 1pc | | | The frame adopts 3mm national standard profile welding, and the
body is 2mm thick Q235 plate laser cutting and welding |
| 4 | Grading screen | MMJP63*3 | 1pc | 1.1 | 1.1 | 1. Compact structure, convenient operation of the machine, stable
performance 2. Continuous sieving with three-layer sieve surface to
separate broken quinoa and whole quinoa |
| 5 | Cold storage | 1CBM | 1pc | | | 1.5mm prefabricated carbon steel, lined with stainless steel
screen, double-sided paint |
| 6 | Magnetic separator | TCXT-15 | 2pcs | | 0 | Stainless steel material, remove ferrous materials |
| 7 | Chakron | φ600 | 1pc | | 0 | Down-spin 55 type, carbon steel material (thickness t≥1.0mm)
sprayed |
| 8 | Direct-connected air blower | TGFZ-7L | 1 pc | 0.75 | 0.75 | 1. Natural aging treatment, impeller grinder technology 2. Case
HT-250 roll carburizing and quenching treatment 3. Good closed air
effect, no material leakage |
| 9 | High pressure fan | 6-30№5A | 1 pc | 7.5 | 7.5 | The motor adopts the domestic first-line brand, the frame adopts
the national standard 3mm profile welding, the body adopts the
national standard 3mm steel plate cutting and welding, the fan
impeller is adjusted by dynamic balance, and the vibration
reduction device is installed. |
| 10 | High-pressure wind network | | 1 set | | 0 | Carbon steel material (thickness t≥1.0mm) spray treatment |
| 11 | Direct-connected air blower | TGFZ-5L | 1 pc | 0.75 | 0.75 | 1. Natural aging treatment, impeller grinder technology 2. Case
HT-250 roll carburizing and quenching treatment 3. Good closed air
effect, no material leakage |
| 12 | Quadruple dust collector | φ600 | 1 pc | | 0 | Carbon steel material (thickness t≥1.5mm) spray treatment |
| 13 | Electronic packing machine | DCS-25 | 1 pc | 0.74 | 0.74 | Automatic electronic quantitative weighing, rated packaging volume
10kg-25kg, graduation value 5g, packaging accuracy X (0.1),
packaging speed 300-600 bags per hour, power supply AC220 150W,
demand air pressure 0.4-0.8MPa |
| 14 | Air compressor system | | 1 set | 3 | 3 | Including refrigeration dryer, gas storage tank, gate valve and
other gas pipeline fittings |
| 15 | Total | | | | 55.34 | |
