Programmable Constant Temperature Humidity Environmental Climate
Test Equipment
Brief Introduction:
Temperature humidity test chamber is use to test material heat,
cold, dry resistance, humidity resistance.
Suitable for electronics, electrical appliances, communications,
instrumentation, vehicles, plastic products, metal, food, chemical,
building materials, medical, aerospace and other products.
Model Selection: | Model | iXB-OTS-150 | iXB-OTS-225 | iXB-OTS-408 | iXB-OTS-800 | iXB-OTS-1000 | Inner size
WHD (cm) | 50*60*50 | 60*75*50 | 80*85*60 | 100*100*80 | 100*100 *100 | External size
WHD (cm) | 70*162.5 *153 | 80*177.5 *153 | 100*192.5 *163 | 120*209 *183 | 120*209 *203 | Window Size
WH (mm) | 500*600 | 600*750 | 800*850 | 100*100 | 100*100 | Test Hole Size
Diameter(mm) | 2 holes
50mm of each | 2 holes
100mm of each | 2 holes
100mm of each | 2 holes
100mm of each | 2 holes
100mm of each | | Weight | 320KG | 370KG | 460KG | 560KG | 590KG |
Technical Specifications: | Voltage | 1Ø 220V 50Hz/ 3Ø 380V 60Hz/Customized | | Temperature range | -70℃ ～180℃ | | Humidity range | 10% ～98%RH
(5%~98% R.H. customized) | | Temp.& humidity control fluctuation | ≤±0.5℃, ≤ ±2.5%RH | | Indication resolution | 0.01℃, 0.1 %RH | | Temp.&humidity Uniformity | ≤±1.5℃,≤±2.5% RH | | Heating &Cooling time | ≤5℃/min for heating; ≤ 1.2℃/min for cooling | | Cooling type | Air cold | | Chamber materials | SUS#304 stainless steel for Inner chamber with thickness 1.5mm
Steel plate for external chamber with thickness 1.5mm | | Insulation materials | Rigid polyurethane foam + ultrafine glass fiber with thickness of
100mm |
Mechanical Room | Refrigerating unit, water supply and drainage device, blower fan,
power distributing Cabinet;
Humidifying and humidity measuring water utilization control device |
Electronic Box | Heat emission blower fan
Distribution switchboard
Test terminal of sample
USB physical interface (need to be purchased together with
centralized monitoring software)
Residual current circuit breaker of main power supply |
Heating Device | Basin heating humidifying method
Stainless steel armored heater is adopted in basin humidification
Control mode of heater: non contact equal period pulse-width
modulation, SSR (solid state
relay)
Water level control device, dry heating prevention device of heater | | Humidifier | 1.Basin heating humidifying method
2.Control mode of heater: non contact equal period pulse-width
modulation, SSR (solid state relay)
3.Water level control device, dry heating prevention device of
heater |
Control panel | Temperature (humidity) control display, over temperature protection
setting device,emergency switch, run indicator, failure
indicator |
Compressor | Imported Compressor
Fits wide range of pressure
Higher heating efficiency
Easy to maintain |
Features | 1.Unique design of the box within the wind circulation structure,
to ensure that under the conditions of the test with the case of
uniformity within the box within ± 2 ℃
2.Unique design of the humidity test when the top of the box
anti-drip design to ensure that live test from water short circuit,
surface water pollution
3.Using the latest environmentally friendly adsorption drying
processor, effective control of the product when the surface
temperature condensation
4.The refrigeration room is fully sealed and soundproofed to reduce
machine noise and box resonance, machine noise control within
75db./Other Contact us |
|
