It is applicable for wide range of material for tension,
compression, bending, shearing and low cycle test. Suitable for
metal, rubber, plastic, spring, textile, and components testing. It
is widely used in the corresponding industries, research and
development, test institutes and training centers
etc.Standard:ASTM, ISO, DIN, GB and other international standards.
Main Technical Parameters:
| Model | WDS-5 5KN Digital Display Electronic Universal Testing Machine / Plastic Film Tensile Strength Tester |
| Max. load | 5KN |
| Structure | Four-column floor model, (upper is tensile and lower is
compression; upper is compression and lower is tensile) |
| Control method | Single chip control |
| Load accuracy | 1 class |
| Load range | 2%~100%F·S/0.4%-100% FS |
| Displacement Resolution | 0.04um |
| Test speed | 0.05-300mm/min(can be customized) |
| Tensile space | 700mm(can be customized) |
| Compression space | 700mm(can be customized) |
| Test width | 400mm(can be customized) |
| Power supply | AC220V±10%,50Hz(can be customized) |
| Grips | Wedge type, plate type and other grips as consumer’s demand |
| Dimension | 800*490*1960mm |
Main Unit Feature:
1. Adopt floor structure,High Stiffness, lower for tensile, upper
for compression,upper for tensile, lower for compression, double
space. The beam is step less lifting.
2. Adopting ball screw drive, realize no clearance
transmission,make sure the precision control of the test force and
deformation speed.
3. The shiel plate with limit mechanism used to control the beam
moving range, in order to avoid sensor damaged due to the moving
distance is too large.
4. The table, moving beams is made of high quality precision
machining steel plate , not only reduce the vibration generated by
specimen fracture, but also improve the stiffness.
5. Three columns of mandatory orientation, make the main unit
rigidity much improved, to further ensure the repeatability of
measurement.
6. Adopt bolt type grip installation, make the grip replace easier.
7. Adopt AC servo driver and AC servo motor, with stable
performance,more reliable. Have over-current, over-voltage, over
speed, overload protection device
Function Features:
1.Automatic calibration: system can automatically realize the
accuracy of the calibration value.
2.After the sample broken, automatic stop.
3.Automatic display: Real-time display testing force, displacement,
testing speed, peak value, testing status on one LCD.
4.Automatic return: beam automatic return to initial position when
testing finished.
5.Breakage judgment: sample after fracture,beam automatic stop
moving.
6.Limiting protection: Program control and Mechanical limiting
protection.
7.Overload protection: When more than 3 ~ 5% of the rated load
device automatically stop working
8.Automatic calculation: automatic calculation area after input
sample diameter (round); Width, thickness (flat), sample gauge ect.
Configurations:
1.High strength main
unit------------------------------------------------------------------------------1
set
2.High precision arc synchronous deceleration
system---------------------------------------1 suit
3.High precision ball
screw---------------------------------------------------------------------------2
pcs
4.AC Servo motor and Control system(Panasonic optional
)----------------------------- 1 set
5.High precision load sensor(CELTRON
optional)----------------------------------------1 pc
6.Tensile fixture
-----------------------------------------------------------------------------------------1
suit
Round:4-9mm,9-14mm(optional);Flat:0-7mm,7-14mm(optional)
7.Compression fixture
------------------------------------------------------
----------------- --------1suit
8.Bending fixture(optional)
---------------------------------------------------------------
------1suit
9.LCD
controller------------------------------------------------------
-----------------------------------1 set
10.Printer(optional)----------------------------------------------------------------------------------1
set
