UL CERTIFICATIONS 0.6MM SOLDERABLITY TRIPLE INSULATED WIRE TIW
INSUALTED FINE COPPER WIRE FOR WINDING
We may be the only one supplier who can provide class F/155 triple
insulated wire which size starts from 0.15mm. At this level, our
quality is better than Furukawa that was tested by some transofmer
manuafactures whom used triple insulated wire from Furukawa.
FEATURES
The feature of triple inslated wire is in its insulation layers.
IEC standards require specified insulation between primary and
secondary coils of transformers. And the standards do not accept
general enameled wire as insulation therefore insulation tape or
barrier tape are required in transformers using enameled wire.
Triple insulated wire however, has triple insulation layers which
comply IEC requirement and therefore can be used without barrier
tape or interlayer tape between primary and secondary coils.
SPECIFICATION
Conductor m/m | End product m/m | Maximum Conductor Resistance at 20 ℃ | Minimum Elongation % |
Diameter m/m | Tolerance m/m | Target outside diameter | Tolerance m/m |
|
0.15 | ±0.008 | 0.35 | ±0.02 | 1111 | 15 |
0.16 | ±0.008 | 0.36 | ±0.02 | 908.8 | 15 |
0.17 | ±0.008 | 0.37 | ±0.02 | 853.5 | 15 |
0.18 | ±0.008 | 0.38 | ±0.02 | 757 | 15 |
0.19 | ±0.008 | 0.39 | ±0.02 | 676.2 | 15 |
0.2 | ±0.008 | 0.4 | ±0.02 | 607.6 | 15 |
0.21 | ±0.008 | 0.41 | ±0.02 | 549 | 15 |
0.22 | ±0.008 | 0.42 | ±0.02 | 498.4 | 15 |
0.23 | ±0.008 | 0.43 | ±0.02 | 454.5 | 15 |
0.24 | ±0.008 | 0.44 | ±0.02 | 416.2 | 15 |
0.25 | ±0.008 | 0.45 | ±0.02 | 382.5 | 15 |
0.26 | ±0.010 | 0.46 | ±0.02 | 358.4 | 15 |
0.27 | ±0.010 | 0.47 | ±0.02 | 331.4 | 15 |
0.28 | ±0.010 | 0.48 | ±0.02 | 307.3 | 15 |
0.29 | ±0.010 | 0.49 | ±0.02 | 285.7 | 20 |
0.3 | ±0.010 | 0.5 | ±0.02 | 262.9 | 20 |
0.32 | ±0.010 | 0.52 | ±0.02 | 230 | 20 |
0.35 | ±0.010 | 0.55 | ±0.02 | 191.2 | 20 |
0.37 | ±0.010 | 0.57 | ±0.02 | 170.6 | 20 |
0.4 | ±0.010 | 0.6 | ±0.02 | 145.3 | 20 |
0.45 | ±0.010 | 0.65 | ±0.02 | 114.2 | 20 |
0.5 | ±0.010 | 0.7 | ±0.02 | 91.4 | 20 |
0.55 | ±0.020 | 0.75 | ±0.02 | 78.2 | 20 |
0.6 | ±0.020 | 0.8 | ±0.02 | 65.3 | 20 |
0.65 | ±0.020 | 0.85 | ±0.02 | 88.3 | 20 |
0.7 | ±0.020 | 0.9 | ±0.02 | 47.2 | 20 |
0.75 | ±0.020 | 0.95 | ±0.02 | 41.2 | 20 |
0.8 | ±0.020 | 1 | ±0.02 | 36.1 | 25 |
0.85 | ±0.020 | 1.05 | ±0.02 | 31.9 | 25 |
0.9 | ±0.020 | 1.1 | ±0.02 | 28.4 | 25 |
0.95 | ±0.020 | 1.15 | ±0.02 | 25.4 | 25 |
1 | ±0.030 | 1.2 | ±0.02 | 23.3 | 25 |
