ENAMELED COPPER WIRE SELF BONDING WIRE WITH FULL THERMAL RATING
RANGE We bring out a huge selection of Super Enameled Copper Wire that
are enabled with good conductivity. Manufactured with quite user
friendly and safe approach, these wires are available in different
sizes and easy to handle. Our range of enameled copper wires is
finely coated with a layer of insulation to prevent with a short
circuit when it is being wound into coils. These wires offer
excellent resistance to heat shocks and hence thereby suitable for
high-speed winding. They further ensure a high endurance with able
mechanical strength and impressive performance. FEATURES - High resistance to heat shock
- High temperature
- Good performace at softening breakdown
- Suitable for high-speed automated routing
- Able to be direct weld, with no pinhole
- Resistive to high frequency, wearing, refrigerants and electronics
corona
- High breakdown voltage, small dielectric loss angle
APPLICATION - Used for automotive coils as relays and ignition coils. In
transformers and in solenoidsSmall transformers, linear motors,
relays, solenoids, small motors, clock coils, watch coils, magnetic
heads.
- Automotive sensors and coils as relais and ignition coils.
- Generators, dry-type or oil-immersed.
- Anti-explosion motor, air-conditioner compressor, washing machines
SPECIFICATION Nominal Diameter mm | Tolerance | Min. Increase of Diameter | Max. Overall Diameter | Breakdown Voltage | Elongation | Pin Hole | Electrical Resistance | | | | | | mm | ≥ V | ≥% | ≤Default/5m | Ω/km (20℃) | | | | | Mandrel Method | Twisted Method | | | Min. | Max. | 0.4 | ±0.004 | 0.025 | 0.437 | ---- | 2900 | 27 | 5 | 132.2 | 140 | 0.41 | ±0.004 | 0.025 | 0.447 | ---- | 2900 | 27 | 5 | 125.9 | 133.2 | 0.44 | ±0.004 | 0.025 | 0.477 | ---- | 2900 | 27 | 5 | 109.5 | 115.5 | 0.45 | ±0.004 | 0.025 | 0.487 | ---- | 2900 | 27 | 5 | 104.7 | 110.4 | 0.47 | ±0.004 | 0.026 | 0.508 | ---- | 3100 | 27 | 5 | 96.05 | 101.1 | 0.5 | ±0.004 | 0.026 | 0.539 | ---- | 3100 | 27 | 5 | 84.96 | 89.23 | 0.55 | ±0.004 | 0.027 | 0.59 | ---- | 3300 | 28 | 5 | 70.31 | 73.64 | 0.6 | ±0.005 | 0.027 | 0.64 | ---- | 3500 | 28 | 5 | 58.96 | 62.01 | 0.65 | ±0.005 | 0.027 | 0.69 | ---- | 3500 | 28 | 5 | 50.3 | 52.77 | 0.7 | ±0.005 | 0.029 | 0.742 | ---- | 3500 | 28 | 5 | 43.42 | 45.45 | 0.75 | ±0.005 | 0.03 | 0.794 | ---- | 3800 | 28 | 5 | 37.86 | 39.55 | 0.8 | ±0.005 | 0.032 | 0.846 | ---- | 3800 | 28 | 5 | 33.3 | 34.73 | |
|
