POLYESTER ENAMELED ROUND COPPER WIRE CLASS 1 WIRE WITH HIGH HEAT
RESISTANCE
Enameled Copper Wire is a wire coated with a thin layer of enamel
(varnish) insulation to prevent the wire surfaces from being in a
short circuit when wound into coils. Magnetic flux is created when
current flows through the coil. Aluminum Enameled Wire and Copper
Enamelled Winding Wire are used mainly in the construction of
motors, electromagnets, transformers and inductors. For ease of
manufacturing inductive components like transformers and inductors,
most of these wires can be soldered.
FEATURES AND BENEFITS
High heat resistance
Excellent adherence and flexibility
Good solvent resistance and electrical properties
Excellent mechanical properties
Stable performance
APPLICATION
Small type Gerators ( For no-Utility generation )
Standard motor
Small type motor ( Electric household appliance, Toys & etc. )
Motors for electric tool ( Grinders drills, saws, planers &
etc. )
SPECIFICATION
Dimensions | Minimum dielectric breakdown voltage V. | Failing load in resistance-to- abrasion test N (gf) | Maximun conductor resistance per unit length W / km (20oC) | Minimum elongation % |
Conductor | Minimum film | Maximum overall thickness mm. |
Average value (min.) | Lowest value (min.) |
Diameter mm. | Tolerance mm. | thickness |
mm. |
0.10 | +0.008 | 0.009 | 0.140 | 2000 | - | - | 2647 | 15.0 |
0.11 | 0.150 | 2153 |
0.12 | 0.010 | 0.162 | 2200 | 1786 |
0.13 | 0.172 | 1505 |
0.14 | 0.182 | 1286 |
0.15 | 0.192 | 1111 |
0.16 | 0.011 | 0.204 | 969.5 |
0.17 | 0.214 | 853.5 |
0.18 | 0.012 | 0.226 | 2400 | 757.2 |
0.19 | 0.236 | 676.2 |
0.20 | 0.246 | 607.6 |
0.21 | 0.256 | 549.0 |
0.22 | 0.266 | 498.4 |
0.23 | 0.013 | 0.278 | 454.5 |
0.24 | 0.288 | 416.2 |
0.25 | 0.298 | 382.5 |
0.26 | + 0.01 | 0.310 | 3.5 {357} | 3.0 {306} | 358.4 |
0.27 | 0.320 | 331.4 |
0.28 | 0.330 | 3.6{367} | 307.3 |
0.29 | 0.340 | 3.1(316} | 285.7 | 20 |
0.30 | 0.014 | 0.352 | 2800 | 3.9 {98} | 3.3 {337} | 262.9 |
0.32 | 0.372 | 230.0 |
0.35 | 0.402 | 4.0{408} | 3.4{347} | 191.2 170.6 |
0.37 | 0.424 |
0.40 | 0.015 | 0.456 | 4.4{449} | 3.7{337} | 145.3 |
0.45 | 0.016 | 0.508 | 4.7{479} | 4.0{408} | 114.2 |
0.50 | | 0.017 | 0.560 | 3050 | 5.1 {520} | 4.4 {449} | 91.43 |
0.55 | + 0.02 | 0.620 | 78.15 |
0.60 | 0.672 | 65.26 |
5.2{530} | 4.5{459} |
0.65 | 0.018 | 0.724 | 5.6{571} | 4.8{490} | 55.31 |
0.70 | 0.019 | 0.776 | 6.0{612} | 5.1{520} | 47.47 |
0.75 | 0.020 | 0.830 | 3400 | 6.4{653} | 5.4{551} | 41.19 |
0.80 | 0.021 | 0.882 | 6.7{683} | 5.7{581} | 36.08 | 25.0 |
0.85 | 0.022 | 0.934 | 7.1{724} | 6.0{612} | 31.87 |
0.90 | 0.023 | 0.986 | 7.5{765} | 6.4{653} | 28.35 |
0.95 | 0.024 | 1.038 | 7.9{806} | 6.7{683} | 25.38 |
1.0 | + 0.03 | 0.025 | 1.102 | 8.3{847} | 7.0{714} | 23.33 |
1.1 | 1.204 | 8.7{887} | 19.17 |
0.026 | 4150 | 7.4{755} |
1.2 | 1.304 | 8.8{898} | 16.04 |
1.3 | 0.027 | 1.408 | 9.2{938} | 7.8{796} | 13.61 |
1.4 | 1.508 | 9.3{949} | 7.9{806} | 11.70 |
1.5 | 0.028 | 1.612 | 9.8 {1000} | 8.2{836} | 10.16 |
1.6 | 1.712 | 8.3{847} | 8.906 |
1.7 | 0.029 | 1.814 | 4350 | 10 {1020} | 8.7 {887} | 7.871 |
1.8 | 1.914 | 7.007 |
1.9 | 0.030 | 2.018 | 11{1120} | 9.1{928} | 6.278 |
2.0 | 2.118 | 9.2{938} | 5.656 | 30.0 |
2.1 | 0.031 | 2.220 | 9.5{968} | 5.123 |
2.2 | 0.032 | 2.322 | 12{1220} | 9.8{1000} | 4.662 |
2.3 | 2.422 | 9.9{1010} | 4.260 |
2.4 | 0.033 | 2.526 | 10{1020} | 3.908 |
2.5 | 0.034 | 2.628 | 13{1330} | 11{1120} | 3.598 |
2.6 | 2.728 | 3.324 |
2.7 | 2.828 | - | - | 3.079 |
2.8 | 2.928 | 2.861 |
2.9 | 3.028 | 2.665 |
3.0 | 3.128 | 2.489 |
3.2 | + 0.04 | 3.338 | 2.198 |
