Three Phase Four Wires Din Rail KWH Meter Active Energy With LCD Display

Three Phase Four Wires Din Rail KWH Meter LCD Display Electric Meter

Functions and Features:

＊ 35mm standard DIN rail installation, which is complying with standard DIN EN50022; Or front board setting (mouting holes center distance 63 mm), user can choose any one by himself;

＊ 10 pole width (Modulus 12.5mm), which is complying with standard JB/T7121-1993;

＊ 6+1 (999999.9kWh) or 5+2 (99999.99kWh) digits LCD display with white backlight;

＊ There is amaintenance free lithium battery inside, for power off reading;

＊ There are polarity port of pulse output passive closed and a no polarity port of pulse output passive distant (the output rate is 10 or 100 imp/kWh, which can be selected). It can contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864;

＊ 5 LED indicated every power state and signal of closed power impulse and distant power impulse ;

＊ Automatic detect the direction of the trend of load current, and indicated on individual LED;

＊ Single direction three components measure three phase four wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.

＊ Directly connection as type S (Inlet from bottom, outlet from top), and CT operation is also acceptable.

＊ External or short terminal cover are both acceptable, just based on your requirement. 

Technical Parameters: