100 Meters IP68 12W 2000LUM/M LED Mining Strip Lights

LED mining strip lights cool white color 220V support 100 meters length silicone material impact and corrosive resistant

*-* About heavy duty led strip lights:

LED STRIP LIGHTS specific for using in mines, hazardous by gas(methane) or coal dust worksite enviornment.

1. New led strip light design especially for industrial usage.

Some special enviroment: underground coal/gold/metal mines, drilling well, tunnel cove lighting and other

dust, humidity, rain, tremors, compressive environment and under the environment of corrosive gas lighting.

2. Other type RGB normal led strip decoration:

Swimming pool, building decoration, amusement park and theater lighting,emergency hallway lighting,

shopping mall, restaurant, hotel, meeting room and advertisement lighting and decoration,Architectural decorative lighting,Amusement park, theater, aircraft cabin mood lighting, channel letter lighting

*-* Product Testing details of LED Strip Lighting:

Flame Retardancy Testing
To ensure that the led light strip is fire retardant and self-extinguishing to the EN 60598-1:2008 standard.

Water Ingress Protection Testing
Conducted to ensure that no moisture enters the light strip to the IP68 standard.

Corrosion Immersion Testing
All accessories are subject to prolonged in house corrosion immersion testing to verify the products durability when exposed to weak Hydrochloric Acid, Alkali and Sea Water Spray.

Restriction of Hazardous Substances Light Strip Testing
For Cadmium, Lead, Mercury, Hexavalent, chromium. Polybrominated Diphenyl Ethers (PBDE’s) to verify compliance with to verify compliance with GB, and MA Directive.

Flexible Lighting Products Testing
All 24-240 Volt strip lighting/accessories are tested to the Flexible Lighting Products standard.

Weight/Tensile Strength Testing
All Green Light led strip lighting and its connectors are subject to in house prolonged weight/tensile strength testing to ensure that they have the required strength and are suitable for the harsh conditions they will be subjected to.

Impact Testing
All Green Lighting strip lighting is subject to in house impact testing to ensure that the product has the required impact strength.

Photometric Testing
All Green Light strip lighting is subject to Photometric Testing in accordance with the Everfine Goniophotometers System Test to verify that the specified amount of luminosity is continuously available from the high-grade LED’s that are used.

Lifecycle Testing
All Green Light strip lighting is subject to in house Lifecycle Testing whereby it is energised 24 hours a day, 365 days a year to monitor and test for any signs of drop in luminescence, or any other form of deterioration.

High and Low Temperature Testing

All strip lighting is available at the temperature -40 to 80 degree, to ensure the different working conditions.

Basic specifications
LED Chip	Epistar
LED configuration	75LEDs spaced evenly over a metre length
Range fed from both sides	20metres
Recommended fixing height	5-6 metres
IP Rating	IP68
Power consumption per LED	0.25 Watts
Power consumption per metre	12 Watts
Colour rendering index CRI	>80
Colur temperature	5000-6500kelvin
Luminous flux	2000 Lum / m
Voltage on lighting VDC	220V
Temperature for storage and transportation	+-40℃
Life span	5 years+
Warranty lighting	1 years
Outer covering	Food grade silicons
Dimensions	10000mm(length) * 14mm-20mm(width) * 4.5mm-10mm(height)
Tensile strength	+- 50KG
Operating temperature	-10 / +30 ℃
Relative humidity,%, at a temperature of + 40 ° C:	- till 100%
Dustiness of ambient air	no more 1000 mg/m3
Rated supply voltage	12V/36V/110-130V AC /220-240VAC (preferably switchable)
Lighting angle	180 degree
MTBF	45000 H
Degradation of luminous flux	5-7% / year
protection against dust and moisture	IP68
Protection	Short circuit , Over temperature , Over Voltage , Over current, Surge and surge protection

*-* Image of heavy duty led strip lights:

*-* Installation of LED tape lighting: