RGB 24V 10M / Roll Waterproof IP68 Led Flexible Tape Light

Heavy duty led strip lighting RGB colors 24V low voltage use for underground mine and tunnel

*-* Main features of led strip lights:

- For using In mines, hazardous by gas (methane) or coal dust
- Temperature for storage and transportation: ± 40 C
- Operating Temperature: - 10 / +20 C
- Relative humidity,%, at a temperature of + 40 ° C: - till 100%
- Dustiness of ambient air, mg / m3, no more: 1000 mg/m3
- Rated supply voltage: 12V/36V/110-130V AC /220-240VAC (preferably switchable)
- Luminous flux, Lm / m: 2000
- Color temperature, K: 3000K/4000K/5000K/6000K/7000K/10000K
- Lighting angle, degrees: 180
- Number of LEDs, pcs / m: 60-80 LEDs/m
- MTBF: 45000 H
- Degradation of luminous flux,% / year: 5-7%
- protection against dust and moisture: IP68
- LED Strip Housing Material: Silicon, flame retardant.
- Surge and surge protection

- Power driver : 240W/480W/750W

*-* Application of LED tape lighting:

1. New led strip light design especially for industrial usage.

Some special enviroment: underground coal/gold/metal mines, drilling well, tunnel cove lighting and other

dust, humidity, rain, tremors, compressive environment and under the environment of corrosive gas lighting.

2. Other type RGB normal led strip decoration:

Swimming pool, building decoration, amusement park and theater lighting,emergency hallway lighting,

shopping mall, restaurant, hotel, meeting room and advertisement lighting and decoration,Architectural decorative lighting,Amusement park, theater, aircraft cabin mood lighting, channel letter lighting.

*-* Image of heavy duty led strip lights:

*-* Product Testing of LED Strip Light:

Flame Retardancy Testing
To ensure that the led light strip is fire retardant and self-extinguishing to the EN 60598-1:2008 standard.

Water Ingress Protection Testing
Conducted to ensure that no moisture enters the light strip to the IP68 standard.

Corrosion Immersion Testing
All accessories are subject to prolonged in house corrosion immersion testing to verify the products durability when exposed to weak Hydrochloric Acid, Alkali and Sea Water Spray.

Restriction of Hazardous Substances Light Strip Testing
For Cadmium, Lead, Mercury, Hexavalent, chromium. Polybrominated Diphenyl Ethers (PBDE’s) to verify compliance with to verify compliance with GB, and MA Directive.

Flexible Lighting Products Testing
All 24-240 Volt strip lighting/accessories are tested to the Flexible Lighting Products standard.

Weight/Tensile Strength Testing
All Green Light led strip lighting and its connectors are subject to in house prolonged weight/tensile strength testing to ensure that they have the required strength and are suitable for the harsh conditions they will be subjected to.

Impact Testing
All Green Lighting strip lighting is subject to in house impact testing to ensure that the product has the required impact strength.

Photometric Testing
All Green Light strip lighting is subject to Photometric Testing in accordance with the Everfine Goniophotometers System Test to verify that the specified amount of luminosity is continuously available from the high-grade LED’s that are used.

Lifecycle Testing
All Green Light strip lighting is subject to in house Lifecycle Testing whereby it is energised 24 hours a day, 365 days a year to monitor and test for any signs of drop in luminescence, or any other form of deterioration.

High and Low Temperature Testing

All strip lighting is available at the temperature -40 to 80 degree, to ensure the different working conditions.