SR609C Intelligent Controller For Pressurzied Solar Water Heater Element Off/On

SR609C Intelligent Controller for Pressurzied Solar Water Heater Element Off/On

Introduction:

Suitable for integrated un-pressurized solar system

Main Technical data:

1 Dimension: 210 mm x 145mm x 40mm
2 Self power consumption: <3W
3 Measuring accuracy of temperature: ±2℃
4 Temperature range of measurement: 0～99℃
5 Maximum power of controlled pump: ≤600W
6 Power of accompanied electrical heating wire: ≤800W
7 Power of auxiliary electrical booster ≤2000W ( standard collocation),
≤3000W (not standard selection available )
8 Electromagnetic valve parameter: DC 12V AC 220V

pressurized valve and un-pressurized valve are available for selection
※ operation pressure of pressurized valve: 0.02Mpa ~ 0.8Mpa
suitable for providing water directly
※operation pressure of un-pressurized valve: 0.0Mpa
connected with water tank or low pressure water providing

Main Functions:

1, Time display
2, Water temperature display
3, Water level display
4, Auto mode
5, Water level pre-setup
6, Manual water loading
7, Temperature controlled water loading
8, Timing water loading
9, Water loading when tank is lack of water
10,Compulsive water loading
11,Increasing Water pressure during water is loaded.
12,Manual heating
13,Timing heating
14,Hot water circulation
15,Hot water pipe insulation
16,Low pressure protection
17,Collector tube protection
18,Memory protection when power is failure.

Description

Material of out tank: 0.4mm thickness color steel/ fluorine carbon steel

Material of inner tank: Food grade 1.2mm thickness ,SUS304-2B stainless steel

Tank insulating layer: 55mm 45kg/m³ high-density polyurethane foamed

Inlet and outlet hole: Male G 1/2, 3/4

Max pressure: 0.6Mpa

Solar collector tube: 3.3 Borosilicate glass with N/Al coating

Thickness of glass tube: 1.6mm

Vacuum tube tightness: P≤0.005 Pa

Absorption: as=0.93-0.96(AM1.5)

Emission ratio: εh=0.04-0.06(80C±5C)

Idle sunning property parameters: Y=220~260m2.C/K

Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)

Bracket: 1.5mm thickness Galvanized Steel

Structure of tank: 5 holes for air vent,water inlet and outlet,electric heater,Mag Rod

Welding: Argon arc welding

Fastening pieces: Made of stainless steel screw

Absorber area: 2.125 m²

Tube quantity: 30tubes, 58x1,800mm with heat pipe

Tank capacity: 300L

Pressurized Solar Water Heater Specifications:

Remarks:

1. Lead-time:7-15 working days after receiving payment.

2. Payment Term:T/T, L/C, Western Union.

3. Warranty:5 years for the full system, 15 years for the vacuum tube,and 1year for accessories.

4. Trade Term: FOB, CFR and CIF.

System Working Pricinple: