200L Integrated Non Pressurized Vacuum Tube Solar Water Heater for Swimming Pool

200L Integrated Non Pressurized Vacuum Tube Solar Water Heater for Swimming Pool

Working principle:

Larger proportion of hot water than cold water, cold water flows downward and hot water goes upward.

Water will be heated continuously between water tank and vacuum tube.

Hot water always floats on cold water.

Hot water flows to water tank from vacuum tubes.

Proportion cold water flows to vacuum tubes from water tank .

Certificate:CE

Detail Description:

1. It takes advantage of the tap water’s pressure. More pressure more comfortable.

2. The water is heated in short time and meeting your demand for hot water.

3. It can produce more hot water than the general types with continuous hot water coming.

Material:

Inner tank: Imported stainless steel (SUS304/2B), 0.4mm thickness

Outer tank: PVDF Coated Galvanized steel alloy,0.4mm thickness

Bracket: Galvanized steel alloy, 1.5mm thickness

Heat insulation layer: Imported polyurethane (Bayer, Germany), 50mm thickness

Working temperature: 99 Celsius degree

Working pressure: 0.05 bars

Accessory: Optional assistant tank and electrical heater

Accessories:

Stainless bolts & nuts, water-proof silicon rubber, anti-aging dust-proof rubber seal, plastic pipe holder and ventilating cap to ensure their lives as long as other parts of the system

Optional Devices:

Assistant tank, automatically feed tap water into storage tank to keep it sufficient always

Electrical heater, as an auxiliary heating element in case of raining or cloudy days so as to ensure a continuous hot water supply

Intelligent controller, automatically controls water refill and switch on the auxiliary heating device, more intelligent system operation.

Warranty:

6 years international responsibility for integrated system exchange and 15 years for glass vacuum tube compensation due to original quality problems

Remark:

1. Diameter of the tank: 360/460mm

2. Insulation thickness: 50mm

3. Vent connection: 1/2"

4. Electric heater connection: 47mm

5. Cold water inlet: 1/2"

6. Hot water outlet:3/4"

7. Installation angel: 30/45

Additional Information