171 - 180 of 1191
servo lab testing equipment
Selling leads
..., set the frequency, set the angle of continuous reciprocating bending, to assess the folding performance or view the degree of its crack. This ...
2024-12-09 17:51:53
|
... door closing and opening. After specific cycles and check if the hinge damage or defective Standards: QB/T 2189 ,GB/T 10357.5 Can be used to test ...
2025-07-13 00:06:03
|
... action to test the material penetration index. Application This tester is applied to do the waterproof test for leather, leather of imitation, ...
2024-12-09 17:51:53
|
EN 71 Toys Testing Equipment Liquid Leakage Testing Needle Product Information Diameter 1MM, the top radius 0.5MM, load 5N, for leakage testing, ...
2024-12-09 17:51:53
|
Cable Electronic Testing Equipment IEC60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire ...
2024-12-09 17:51:53
|
... were tested in a sealed oven with a radiant heat source of 2.5 w/cm2. Beam attenuation tests were performed under open flame and non-flame ...
2024-12-09 18:02:18
|
...Test Fixture/Toys Safety Testing Equipment Application To determine whether the pacifiers for infants present choking or suffocating hazards. A ...
2024-12-09 18:11:34
|
... doors, horizontal sliding doors, vertical sliding doors, (including linked sliding doors and sectional doors), Fire resistance test of rolling ...
2024-12-09 18:20:48
|
...Test Sets/ BDV Testing Equipment Introduction 60Kv Dielectric Oil Breakdown Voltage Tester Standard: IEC156,IS 6792,ASTM D1816,ASTM D877 and UNE 21 ...
2024-12-09 18:27:44
|
.... The principle is to clamp the finished shoe last on the testing machine, and peel off the sole and upper with a peeling knife. The force of the ...
2024-12-09 20:03:06
|