Machine Introduction
The testing machine will run the test method of peeling the upper
from the outsole, separation between the composite layers of the
sole, tear damage of the upper or sole according to standard ISO
17708.
This machine is suitable for various materials and products in
textile, rubber, plastic, synthetic leather, adhesive tape,
adhesive products, plastic film, composite materials, electronics,
metal and other industries to conduct tensile, compression,
bending, shearing, peeling (90 degrees and 180 degrees), tearing
and other tests to determine the product quality.
It is a simple tensile testing machine with simple structure and
convenient operation. It can be placed on the workbench for
testing. The touch screen control system is adopted to control the
rotation of the variable frequency motor, and then drive the
T-shaped screw to drive the load inductor to rise and fall after
the speed change mechanical mechanism decelerates to complete the
tensile or compression test of the sample. The force value is
output by the sensor, fed back to the display, and the test
displacement is displayed in real time. It can realize the test of
force setting value, positioning displacement, etc.
It can store the results of 10 test reference points, automatically
calculate their average value, automatically grab the maximum
value, and the force value when breaking.
The machine includes a thermal printer, which can automatically
output test results.
Technical Parameter
| Load Capacity | 5-200kg |
| Force measuring accuracy | Within ± 1% of the indicated value |
| Display mode | Touch screen control |
| Unit switching | Kg,lb,N |
| Data sampling frequency | 200times/sec |
| Resolution of testing machine | The maximum load is 1/± 25000 yards, and the internal and external
are not graded, and the overall resolution is unchanged |
| Load cell | Basic configuration: tension and compression sensors (maximum load) |
| Effective test width | 150mm |
| Stretch space effectively | 800mm |
| Test speed range | 50-300 mm/min stepless speed regulation and 5-gear constant speed
(special test speed can also be customized according to customer
requirements) |
| Displacement measurement accuracy | Within ± 1% of the indicated value |
| Breakpoint ratio setting | 0～99％,the user can set proper break down time according to
different materials |
| Test bench safety device | Up and down stroke limiting device |
| Overload protection | The machine is automatically protected when the maximum load
exceeds 10% |
| Fixture configuration | One set of stretching clamp |
| Machine size | Approx.500*400*1300mm |
| Machine weight | Approx.100Kg |
