Furniture Universal Test Equipment/ Table Test Equipment/ Chair
Test Machine/ EN1730/ EN1728/ EN12520/ BIFMA X5.1
Furniture Universal Tester/ EN 1728/EN12520 chair test machine/
multifunctional testing machine/
Product Introduction
This machine is used for static load test and durability test of
table, desk and other furniture. Each pneumatic device can work
together or independently, and can also be adjusted to meet
different test requirements
Test Standards
EN 1728, EN 12520
Technical Parameters
| Basic Test Frame | 3x3x2m,be made of 80x80mm Alu.material |
| Load air cylinder | Seating load: 200kg; Back load:100kg; Arm:100kg; Leg:100kg |
| Force sensor | High precision brand sensors 7 sets |
| Control method | PLC and LCD touch screen |
| Counter | 0~999999 (adjustable) |
| Force adjust | Precision pressure valve equipment with sensor to display |
| Air supply | 7kgf/cm^2 |
| Power supply | 1∮ AC 220V 50Hz 5A |
STANDARD ACCESSORIES:
| Capacity | 200kg (Imported Sensor) |
| Controller and Interface | Programmable logic controller + touch screen interface |
Accessories | Chair Armrest Fixture x 4 pieces 2 for durability test; 2 for strength test |
Seat loading pad x 1 piece for chair seat static load & durability tests |
Smaller seat loading pad x2 pieces for Chair Front edge static load & durability tests |
Back loading pad x 1 piece for chair back static load & durability tests |
Leg loading pad x 1 pieces for horizontal cylinder for balance load |
Impactor x 1 piece for chair seat impact test |
standard foam x 1 piece for chair seat impact test |
Impact hammer x 1 piece for chair back & arm impact test; |
| Air Pressure | 7 bar |
1. All load, cycle rate, speed can be adjusted by the controller. 2. The test results can be output by Word. 3. The actuator is easy adjust to perform Vertical and horizontal
static test. |
Features:
1. Aluminum alloy profile frame structure. All loading components
can be moved and fixed along the frame aluminum profile for optimal
loading position.
2. All the cylinder parts of the loading force adopt the shaft core
hexagonal non-rotating cylinder to keep the loading pad from
rotating loading.
3. The vertical cylinder assembly is mounted on a "base" that
slides freely horizontally and automatically shifts and stays
vertical when subjected to lateral forces.
4. Easy operation, a person can quickly complete the sample
clamping, without any tool assistance.
All channels can be set in independent or combined action mode, and
all channels are set with independent touch switches.
TEST ITEMS FOR CHAIR SEAT,BACK,ARM WITH STRENGTH AND DURABILITY SETS REFERS TO EN BS EN 1728 & EN12520
| NO. | Name | Pictures |
| 1 | Seat surface loading block | |
| 2 | Seat back loading pad (square) | |
| 3 | Small seat surface loading pad (200MM) | |
| 4 | Universal loading pad | |
| 5 | Armrest test fixture | |
| 6 | Block for Height | |
| 7 | Impact block | |
| 8 | Impact Hammer | |
| 9 | 350x350x25mm Test Foam | |
| 10 | CMD Loading point template | |
TEST IMAGE FOR ARM STRENGTH & DURABILITY TESTS
TEST IMAGE FOR ARM & BACK IMPACT TESTS
TEST IMAGE FOR SEAT IMPACT TEST
