Wire Tensile Testing Machine Wire Harness Tester Tensile Test
Instrument Pull-off Testing Machine
Product Introduction Of Terminal Pull Tester
Terminal tension tester is a testing equipment developed by our
company for the wire harness and electronics industry.Designed to
detect the pull-out force of various harness terminals.
Configurable NK, HF push-pull gauges and special fixtures
The instrument has the characteristics of compact equipment,
accurate control, high measurement accuracy, convenient sample
clamping and simple operation, and is an ideal equipment for wire
harness manufacturers to ensure product quality.
Product Features
1.Horizontal installation.
2.Manual operation, simple and stable operation.
3.The machine can be mounted on a table to make the rack more
stable.
Technical Parameters
| Volume | 450 mm × 260 mm × 160 mm |
| Effective stroke | 50mm |
| Rated load | 500N. (Can also be configured with 1000N) |
| Net weight | 10.6Kg |
Test operation process
1. Place the wire part of each harness terminal at the end of the
left clamp, and rotate the handle to clamp the wire part (the
harness terminal has been pressed).
2. Place the other end of the harness terminal into the clamp of
the right clamp and rotate the handle to keep the end of the
harness terminal stuck in the middle.
3. Use the M4 Allen key to align the center of the left clamp to
the center of the right clamp.
4. If the HF series (digital display push-pull force meter) is used
to push and pull the timing, turn on the power, and wait until the
LCD display shows zero.
5. If the push-pull timing of the NK series (pointer type force
gauge) is installed, press the toggle button to return the finger
to the zero position.
6. Turn the handle of the body to move the left clamp to the left
and the right clamp to clamp the terminal.
