UL2556-2013 Standard VW-1 Flammability Tester AC220V
|
VW-1 Flammability Tester
Product Description The VW-1 combustion tester is produced in strict accordance with UL standards It fully complies with the VW-1 combustion test standard and can complete VW-1 and FT-2 tests. It is economical and widely used by the wire and cable industry. The parameters are detailed as follows: The entire test is carried out in a sealed test chamber with a volume of 4.32 cubic meters. Test method: adjust the flame height, place the top of the flame under the test piece, burn for 15 seconds, extinguish for 15 seconds, repeat 5 times and check the burning condition of the test piece. operate. standard: ● UL2556-2013.
Technical Parameter ● Test box: This test machine is made of steel plates spliced together. The body is made of anti-static spraying, which has the characteristics of beautiful appearance, anti-rust and anti-corrosion. The top of the box is equipped with a smoke exhaust device, which can discharge the exhaust gas to the outside after the test is completed. , there are two air inlets on the lower sides and a set of pneumatic sealing operating devices; ● There is an observation window on the front of the box, which is convenient to observe the test situation; ● The interior is illuminated by anti-fog and smoke-proof circular lamps; ● Adopt 7″ color touch screen and PLC control; ● Burning time setting: 0~999S can be set; ● Stop burning time setting: 0~999S can be set; ● Afterburning time setting: 0~999S can be set; ● The thermal sensor adopts electrolytic copper with extremely high conductivity; ● Equipped with imported φ0.5K stainless steel jacket thermocouple; ● The portable intelligent temperature controller matches the K-type thermocouple, and the reading can reach Above 1000℃; ● Burning torches are imported into Hamburg, USA to meet the requirements of ASTM D 5025-99, The standard power is 500W, and the angle is 20°; ● Test stand: VW-1 and FT2 combustion test stand; ● U-tube pressure gauge: 1 (Dwyer Company, USA); ● Flowmeter: high-precision flowmeter 0.1~1.0L/Min, 2-level accuracy; ● Equipped with a micro-printer. Dimension Specification: ● Test box size: 2m(W)×1.2m(D)×1.8m(H); ● Dimensions: 2020mm(W)×1250mm(D)×2365mm(H); ● Power supply: AC220V 50/60Hz 3A; ● Air source: methane, air (provided by the customer). |
Product Tags: VW-1 Flammability Tester UL2556-2013 Flammability Tester Flammability Testing Equipment AC220V |
![]() |
Conveyor Belt Vertical Burning Test Chamber ISO 340 AS1334.10 Conveyor Belt Vertical & Horizontal Burning Test Machine |
![]() |
ISO 340 /AS1334.10 Conveyor Belt Vertical & Horizontal Burning Test Chamber |
![]() |
ASTM E1354 Cone Calorimetry Testing Machine Cone Calorimeter Fire Tester |
![]() |
Heat Release Tester ISO 5660 Cone Calorimeter For Building Materials Fire Testing Equipment |
![]() |
ISO 5660 Flammability Analyzer Cone Calorimeter For Laboratory |
![]() |
Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438 |