Electric Desktop Tensile Testing Machine
Product information
Electric Desktop Tensile Testing Machine a simple type machine,
simple structure, convenient operation, It can be tested on the
operated table, Using the electronic control systems, load sensor
is rising and falling to test the tension or compression through
the motor rotation, transmission machinery and T-screws. This
machine is simple to operate, especially suitable for controlling
quality in production line, This series of machine is mainly
applied to test the non-metallic and metallic materials which the
load is less than 1KN.
Technical parameters
Maximum Load 1KN high-precision sensors from U.S.A.
Capacity choice 200N, 500N, 1KN or less than can be self-selected
Units Kg, lb, N
Measured System Load cell + HZ-2000
accuracy of load measurement the load cell + HZ-2000 screen ± 0.5%
(full range of 5% -100%)
Resolution 1 / 50000
Maximum test space (excluding fixtures) About 600mm (excluding
gripper, special testing space can be customized according to
customer needs)
Test speed 50-300mm / min with stepless speed and 5 fixed-speed
(special testing speed can also be customized according to customer
needs)
1. single test, 10-point statistics manually and automatically
calculate its average and break values;
2. Multi-unit automatically exchange such as kgf, Lbf, N
3. Dunction of free to take point
4. With multi-calibration function
5. Auto printing function
6. Using 24-bit AD acquisition, resolution 1 / 200000
7. Decimal digits 0 to 4 arbitrary choice
8. Starting up using password protection feature, which can
effectively prevent the non-operators to use
9. Ratio of Breakpoint from 0 ~ 99%, which the user can set
according to different materials to stop the machine
10. Overload protection function can be set, effectively preventing
machine from overload; ratio of Breakpoint from 0 ~ 99%, which the
user can set according to different materials to stop the machine,
realizing stop machine at any position.
Safety : The system would shut down if overload or over-trip.
shape, column shell is made of aluminum material.
Power Systems AC Motor
| Power | 120W |
| Volume | 450 × 550 × 1400mm |
| Weight | 75kg |
| Power | 220V, 15A |
