ISO834-1 Building Materials Flammability Tester Multifunctional Horizontal Combustion Test Equipment
|
ISO834-1 Multifunctional Horizontal Combustion Test Equipment , Combustion Test Furnace
Application Suitable for load-bearing and non-load-bearing members such as walls, beams, columns, slabs, ceilings and roofs. Other structures, fittings or structures can be used as reference.
Compliance with standards "Building component fire test method Part 1: General requirements", ISO834-1: 1999 "Fire test building components Part 1: General Requirements
Technical parameters Refractory test furnace: It is a horizontal test furnace with a size of 6M (length) x 6M (width) x 3M (high) (can be customized), and the interior is made of high temperature resistant insulation material. Loading device: mechanical loading to move the bridge crane inside the building. Ability to simulate uniform loading, centralized loading, axial loading, or eccentric loading. Support frame: connected to the wedge bracket on the frame by four rollers. Thermocouples: thermocouples in the furnace, backfire thermocouples, moving thermocouples, internal thermocouples, ambient temperature thermocouples are distributed in various areas. In-furnace pressure measuring probe: T-shaped measuring probe with measuring accuracy ± 2Pa Test piece gap measurement probe: ±0.1mm diameter 6mm diameter ±0.2mm diameter 25mm Combustion system: gas distribution system (within 10 meters), fire nozzle (not less than 20) and regulating valve Combustion gas source: natural gas (user-owned) Gas flow rate: 0~100L/min Measurement accuracy 2.5 Air flow: 0~50m3/min Measurement accuracy ≤±0.5m3/min Gas tank capacity: ≥50kg×6 Furnace temperature control system: 10 points maximum sampling point Ventilation system and control damper, etc. Radiation heat measurement of the back surface of the test piece: 0~10W/cm2 The furnace temperature and pressure control is connected to the control system via the computer's RS485. The DC output voltage of the combustion test sensors such as thermocouples and pressure sensors is converted to digital form and can then be passed to the computer system for display and storage. |
Product Tags: lab testing equipment vertical flammability chamber |
![]() |
AS1334.10-1994 Conveyor Belt Flammability And Flame Propagation Characteristics Test Chamber |
![]() |
ASTM E1354 HEAT RELEASE CONE CALORIMETER WITH OXYGEN ANALYZER |
![]() |
Building Materials ASTM D2843 Smoke Density Tester For Assessment Of Density of Smoke |
![]() |
DIN 4102-1 ISO 11925-2 ( PLC ) Control Building Materials Flammability Ananlyzer |
![]() |
Iso5660-12002 Cone Calorimeter For Testing The Heat Release Rate Of Building Materials |
![]() |
Building Materials Flammability Tester Conveyor Belt Flammability And Flame Propagation Characteristics Test Chamber |